Rear Fender Ø860 for Cube Reaction Hybrid e-bike

1 views

Bounding box: 807.9 × 95 × 813.5 mm
Engine: 3D Printing B-rep
Parameters: 18
Published: November 11, 2026

Download

Free to download and use. See the terms.

The prompt

ne takto - inspiruj se u kola na obrázku - je to přesně kolo na které to má jít ten blatník Elektrokolo Cube Reaction Hybrid. Na obrázku je blatník zadního kola. Jenom nechci aby se připevňoval k ose pomocí tyček, ale chci aby se připevňoval k tyči od rámu. Chci ho ještě delší vzadu aby byl níže k zemi. Je to kvůli vozíku pro dítě, ať na něj necáká voda.

Parameters

Name	Value	Range
Wheel diameter	830 mm	200 – 1200
Radial gap tyre-to-fender	15 mm	3 – 60
Sheet thickness	3 mm	1.2 – 6
Covering width incl. lips	95 mm	40 – 220
Radial depth of the side lips	10 mm	2 – 40
Edge rounding	1.2 mm	0 – 1.4
Arc start angle, 0 = rear horizontal	-55 deg	-110 – 10
Arc coverage	205 deg	60 – 300
Rear flap length below the fender	45 mm	0 – 120
Rear flap width	65 mm	20 – 200
Width factor at the flap tip	0.85 mm	0.4 – 1
Plate thickness	5 mm	3 – 12
Width at the frame bar	20 mm	12 – 60
Width at the fender	50 mm	20 – 120
Mount angle on the fender	50 deg	0 – 150
Frame bar diameter	20 mm	8 – 40
Clamp clearance	0.6 mm	0.2 – 1.5
Bar distance from hub centre	490 mm	440 – 700

Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.

More models

Browse the full gallery →

600.0 × 400.0 × 450.0 mmPrecision

Table

Make a table of height 45 cm

STEPSTLGLB5 PARAMS

700.6 × 2000.6 × 2000.0 mmPrecision

Haul‑off Reel

Make this haul off reel, the dimensions of it should be a 2 meter diameter circle shaper with 0.7 meter width, i have attached a picture of what it looks like

STEPSTLGLB6 PARAMS

664.7 × 664.7 × 1380.1 mmPrecision

旋转式卷烟陈列架

物件名称：旋转式卷烟陈列架（带语音播报）整体形态：一个圆柱形、可360度旋转的立式展示架。整体高度为1380mm，直径为600mm。底部配有4个带刹车的万向轮，方便移动和固定。结构分层（从下往上）：底座（0-200mm高度）：底部为圆柱形底座，高200mm。外层采用网格状设计（类似金属网孔或菱形网格）。底座内部中空，用于内置音箱设备。

STEPSTLGLB24 PARAMS