Gears and transmission
RC Pickup Truck Chassis
- Bounding box
- 360.0 × 169.5 × 140.0 mm
- Engine
- Precision B-rep
- Parameters
- 16
- Published
- October 28, 2026
Download
Free to download and use. See the terms.
The prompt
so heres what needs to happen quickly. add dimensions to the 3 2d views using the dim layer put a significant amount of dimensions but dont repeat dimension in places where the info can be got from somwhere else. ensure that the dimensions are all nice and clean and CONSISTENT THROUGHOUT also do dimensions for the 3d. ensure that the 3d is also consisetn throught and ensure that the pulleys are present in theyre correct spots. same for the wheels, ensure all 4 wheels are in the correct orientation and are consisnet throughout. the motor should also have a small pulley and the motor itself is a cylinder shape not a rectangle. all of these stuff and indications on how the 3d should look is can all be found by using the 3 2d views, which is the top view, side view and front view so yeah make it nice and clean
Parameters
| Name | Value | Range |
|---|---|---|
| Overall Length | 360 mm | 200 – 600 |
| Overall Width (over wheels) | 160 mm | 100 – 260 |
| Overall Height | 140 mm | 80 – 250 |
| Wheelbase | 190 mm | 100 – 400 |
| Wheel Diameter | 44 mm | 20 – 100 |
| Wheel Width | 16 mm | 6 – 40 |
| Wheel Hub Diameter | 16 mm | 6 – 36 |
| Axle Diameter | 6 mm | 2 – 20 |
| Body Width | 130 mm | 60 – 220 |
| Body Floor Height | 42 mm | 15 – 120 |
| Chassis Top Height | 82 mm | 45 – 180 |
| Motor Diameter | 32 mm | 10 – 70 |
| Motor Length | 50 mm | 15 – 150 |
| Small Pulley Diameter | 20 mm | 8 – 50 |
| Large Pulley Diameter | 34 mm | 12 – 80 |
| Pulley Width | 8 mm | 3 – 25 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Spur Gearbox
design gearbox
Involute Spur Gear with Keyway
Precision Involute Spur Gear with Hub and Keyway: Module (m) of 2.0 mm, 40 teeth (z), Pitch Circle Diameter (d) of 80.00 mm, 20° pressure angle (\alpha), 15.00 mm face width (b), a
Parametric Helical Gear
Create a parametric helical gear with the following specifications: 32 teeth, normal module of 3 mm, right-hand helix, total face width of 80 mm, and a central bore hole with a dia
Rod with Spur Gear
Metal rod diameter is 20 mm and length is 100 mm and right side attach a gear and their OD is 50 mm
Spur Gear (12 Teeth)
Built a gear with 12 teeth
Two-Stage Spur Gear Reduction Assembly
Design a 2-stage spur gear reduction set for 3D printing with an overall 10:1 ratio. Stage 1: A 12-tooth pinion driving a 36-tooth gear (3:1). Stage 2: A 12-tooth pinion coupled