Gears and transmission
RC Car Gearbox Housing + Cover
- Bounding box
- 50.0 × 25.0 × 25.0 mm
- Engine
- Precision B-rep
- Parameters
- 15
- Published
- September 28, 2026
Download
Free to download and use. See the terms.
The prompt
Create a precise 3D-printable RC car gearbox housing. Overall dimensions: - Length: 50 mm (5 cm) - Width: 25 mm (2.5 cm) - Height: 20 mm (2 cm) - Wall thickness: 5 mm (0.5 cm) Design: - Compact rectangular gearbox housing for a small RC car. - Use 5 mm thick walls throughout the housing. - Left and right side walls must have bearing holes. - Bearing hole diameter: 10 mm. - The left and right 10 mm bearing holes must be perfectly aligned and coaxial. - Add one brushless motor mounting hole pattern on the motor side. - Use a standard mounting pattern suitable for a small 28xx-size brushless RC motor. - Inside the gearbox, provide space for exactly 2 gears only. - Do NOT add rack gears or any additional gears. - Provide aligned shaft supports for the two gears. - Include screw/mounting points for assembling the gearbox. - Add a removable top cover. - Keep sufficient clearance for gears to rotate freely. - Add small fillets/chamfers to sharp outer edges. - All dimensions must be accurate and in millimeters. - Design must be suitable for FDM 3D printing. - Output should be STL-ready.
Parameters
| Name | Value | Range |
|---|---|---|
| Housing Length (X) | 50 mm | 30 – 100 |
| Housing Width (Y) | 25 mm | 15 – 60 |
| Housing Height (Z) | 20 mm | 10 – 60 |
| Wall Thickness | 5 mm | 2 – 10 |
| Bearing Bore Dia | 10 mm | 3 – 16 |
| Shaft Axis Height | 10 mm | 3 – 55 |
| Gear Shaft Axis Spacing | 12 mm | 4 – 24 |
| Motor Pattern Spacing (Y) | 19 mm | 8 – 30 |
| Motor Pattern Spacing (Z) | 16 mm | 8 – 30 |
| Motor Screw Hole Dia | 2.5 mm | 1.5 – 5 |
| Cover Thickness | 5 mm | 2 – 12 |
| Cover Screw Hole Dia | 2.5 mm | 1.5 – 5 |
| Screw Hole Depth | 4.5 mm | 2 – 12 |
| Outer Corner Radius | 1.5 mm | 0.5 – 6 |
| Cover Top Chamfer | 0.5 mm | 0.1 – 1.5 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Spur Gearbox
design gearbox
Involute Spur Gear with Keyway
Precision Involute Spur Gear with Hub and Keyway: Module (m) of 2.0 mm, 40 teeth (z), Pitch Circle Diameter (d) of 80.00 mm, 20° pressure angle (\alpha), 15.00 mm face width (b), a
Parametric Helical Gear
Create a parametric helical gear with the following specifications: 32 teeth, normal module of 3 mm, right-hand helix, total face width of 80 mm, and a central bore hole with a dia
Rod with Spur Gear
Metal rod diameter is 20 mm and length is 100 mm and right side attach a gear and their OD is 50 mm
Spur Gear (12 Teeth)
Built a gear with 12 teeth
Two-Stage Spur Gear Reduction Assembly
Design a 2-stage spur gear reduction set for 3D printing with an overall 10:1 ratio. Stage 1: A 12-tooth pinion driving a 36-tooth gear (3:1). Stage 2: A 12-tooth pinion coupled