Everything else
Raspberry Pi cyberdeck briefcase inserts
- Bounding box
- 337 × 493 × 16 mm
- Engine
- 3D Printing B-rep
- Parameters
- 20
- Published
- November 21, 2026
Download
Free to download and use. See the terms.
The prompt
Haluaisin tehdä raspberry pistä cyberdeck projektin, minulla on valmiina salkku ja haluaisin istuttaa salkun pohjalle raspberry pin, usb jakajan ja varavirtalähteen ja salkun kanteen näppäimistön
Parameters
| Name | Value | Range |
|---|---|---|
| Case interior length | 340 mm | 200 – 500 |
| Case interior width | 250 mm | 150 – 400 |
| Clearance to case wall per side | 1.5 mm | 0.5 – 3 |
| Floor plate thickness | 4 mm | 2 – 8 |
| Compartment wall thickness | 3 mm | 2 – 6 |
| Compartment wall height above plate | 12 mm | 6 – 30 |
| Standoff diameter | 7 mm | 5 – 10 |
| Standoff height | 8 mm | 3 – 15 |
| Pilot hole for M2.5 self-tapping screw | 2.2 mm | 1.8 – 3.4 |
| Power bank length | 140 mm | 60 – 220 |
| Power bank width | 70 mm | 30 – 150 |
| Fit clearance per side | 1.2 mm | 0.4 – 3 |
| USB hub length | 100 mm | 40 – 180 |
| USB hub width | 40 mm | 20 – 120 |
| Fit clearance per side | 1.2 mm | 0.4 – 3 |
| Keyboard length | 285 mm | 180 – 400 |
| Keyboard width | 115 mm | 80 – 200 |
| Keyboard thickness | 10 mm | 4 – 30 |
| Fit clearance per side | 1 mm | 0.3 – 2.5 |
| Retaining lip width | 5 mm | 2 – 12 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Table
Make a table of height 45 cm
Haul‑off Reel
Make this haul off reel, the dimensions of it should be a 2 meter diameter circle shaper with 0.7 meter width, i have attached a picture of what it looks like
旋转式卷烟陈列架
物件名称: 旋转式卷烟陈列架(带语音播报) 整体形态: 一个圆柱形、可360度旋转的立式展示架。 整体高度为1380mm,直径为600mm。 底部配有4个带刹车的万向轮,方便移动和固定。 结构分层(从下往上): 底座(0-200mm高度): 底部为圆柱形底座,高200mm。 外层采用网格状设计(类似金属网孔或菱形网格)。 底座内部中空,用于内置音箱设备。
Deck with U-Shape and Stairs
ARE THOSE ALL THE SAME DEMETNIONS THT I GAVE YOU IN THE FIRST MESSAGE
Flip-Top Bottle Cap with Center Hole
我要生成類似瓶蓋跟市售一模一樣 可以上掀蓋然後打開中間會有一個洞
Rounded Rectangular Tray
tôi muốn tạo một khay hình chữ nhật dài khoảng 40x30cm, có gờ của các thành cao lên 4cm, đế dày 2cm và 4 góc được bo tròn
