Brackets and mounts
Raspberry Pi Camera Module 3 Two-Part Enclosure
- Bounding box
- 31.0 × 30.0 × 35.0 mm
- Engine
- Precision B-rep
- Parameters
- 22
- Published
- October 19, 2026
Download
Free to download and use. See the terms.
The prompt
Create a two-part 3D-printed enclosure for a Raspberry Pi Camera Module 3 (board 25 mm x 24 mm, four M2 mounting holes in a 21 mm x 12.5 mm pattern). Units: millimeters. Front part: - Outer size 31 mm x 30 mm, 8 mm deep, wall 2 mm. - Round lens opening 9 mm diameter at the position of the lens (placeholder: centered horizontally, 9.5 mm from the top edge of the board). - Four M2 standoffs inside, 2.5 mm tall, matching the board's hole pattern. Back part: - A 31 mm x 30 mm x 2 mm lid that screws onto the front part with four M2 screws at the corners. - A slot 17 mm x 2 mm at the bottom edge for the flat ribbon cable. - A tab on the back: 25 mm wide, 15 mm tall, 4 mm thick, centered, with one M3 through-hole (3.2 mm) 8 mm from its end, to fit between the mast fork prongs as the tilt hinge.
Parameters
| Name | Value | Range |
|---|---|---|
| Outer Width | 31 mm | 20 – 60 |
| Outer Height | 30 mm | 20 – 60 |
| Housing Depth | 8 mm | 4 – 30 |
| Wall Thickness | 2 mm | 1 – 5 |
| Outer Corner Radius | 2 mm | 0.5 – 6 |
| Lens Opening Diameter | 9 mm | 4 – 20 |
| Lens Below Board Top Edge | 9.5 mm | 0 – 20 |
| PCB Height | 24 mm | 10 – 40 |
| Mount Hole Pattern X | 21 mm | 10 – 40 |
| Mount Hole Pattern Y | 12.5 mm | 6 – 30 |
| Standoff Diameter | 4.5 mm | 3 – 8 |
| Standoff Height | 2.5 mm | 1 – 8 |
| M2 Pilot Hole Diameter | 1.7 mm | 1 – 3 |
| Lid Thickness | 2 mm | 1 – 6 |
| M2 Clearance Hole Diameter | 2.2 mm | 1.5 – 4 |
| Ribbon Slot Width | 17 mm | 5 – 29 |
| Ribbon Slot Height | 2 mm | 0.5 – 6 |
| Hinge Tab Length (rearward) | 25 mm | 8 – 50 |
| Hinge Tab Height | 15 mm | 6 – 30 |
| Hinge Tab Thickness | 4 mm | 1 – 12 |
| M3 Pivot Hole Diameter | 3.2 mm | 1.5 – 8 |
| Pivot Hole From Tab End | 8 mm | 2 – 20 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Trumpet Lyre Mount Main Body
A single 3D mechanical CAD part for a trumpet music lyre mount (Main Body with Paddle). Geometry details: 1. A 18mm-wide semi-cylindrical clamp arc for a 28mm diameter cylinder, w
UAV Ogive Nose Cone
Design a watertight, 3D-printable aerodynamic nose cone module for a fixed-wing tactical UAV, optimized for printing in Carbon Fiber Filled PETG (PETG-CF). The base of the nose con
Flat-Strap Reel Spool
Create a 3D model of a custom flat-strap reel spool for a home plate housing cavity. Geometry: - A reel spool consisting of two parallel circular outer flanges connected by a cent
PET Recycling Kiosk Frame
Design a production-ready welded steel frame for an outdoor PET bottle recycling and animal feeding kiosk. Create ONLY the steel frame. Do not create covers, motors, tanks, electr
Kugoo G2 Pro Rear Swingarm for KuKirin G4
Create a detailed 1:1 CAD drawing of custom rear swingarms for the Kugoo G2 Pro 2020 electric scooter. The swingarms must be designed to fit a KuKirin G4 hub motor instead of the o
Humanoid Robot Exploded Assembly
Design a 3D CAD model of a fully autonomous humanoid biped robot for the Robofest AI HOMO BOT competition. Dimensions Height: 800 mm (80 cm) Maximum weight: 20 kg Lightweight modu