Everything else
Raspberry Pi 10-inch Screen Bezel with Corner Mounting Holes
- Bounding box
- 229.0 × 132.0 × 7.0 mm
- Engine
- Precision B-rep
- Parameters
- 8
- Published
- August 27, 2026
Download
Free to download and use. See the terms.
The prompt
I’d like a bezel for a raspberry pi 10” screen, the bezel should be 7mm deep and 8mm wide . The pi screen should be rebated into the bezel by 2mm and 3mm of the bezel should be visible around the shape/perimeter of the raspberry pi 10” screen. Internally there should be a hole in each corner - the hoes should be 4mm in diameter
Parameters
| Name | Value | Range |
|---|---|---|
| Screen Length | 223 mm | 100 – 400 |
| Screen Width | 126 mm | 50 – 300 |
| Bezel Width | 8 mm | 2 – 20 |
| Bezel Depth | 7 mm | 3 – 20 |
| Corner Radius | 5 mm | 0 – 20 |
| Visible Width | 3 mm | 1 – 10 |
| Rebate Depth | 2 mm | 0.5 – 5 |
| Mounting Hole Diameter | 4 mm | 2 – 10 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Table
Make a table of height 45 cm
旋转式卷烟陈列架
物件名称： 旋转式卷烟陈列架（带语音播报） 整体形态： 一个圆柱形、可360度旋转的立式展示架。 整体高度为1380mm，直径为600mm。 底部配有4个带刹车的万向轮，方便移动和固定。 结构分层（从下往上）： 底座（0-200mm高度）： 底部为圆柱形底座，高200mm。 外层采用网格状设计（类似金属网孔或菱形网格）。 底座内部中空，用于内置音箱设备。
Haul‑off Reel
Make this haul off reel, the dimensions of it should be a 2 meter diameter circle shaper with 0.7 meter width, i have attached a picture of what it looks like