Everything else
Range Rover Bumper Stillage Pallet with HDPE Supports
- Bounding box
- 2400.0 × 1200.0 × 325.0 mm
- Engine
- Precision B-rep
- Parameters
- 25
- Published
- August 19, 2026
Download
Free to download and use. See the terms.
The prompt
Design a Pallet/Stillage to hold a bumper of a Range rover. The Dunnage will need to be HDPE Machined, The pallet itself will require fork pockets. The pallet factor will only require to hold 2 bumpers.
Parameters
| Name | Value | Range |
|---|---|---|
| Pallet length | 2400 mm | 1500 – 3000 |
| Pallet width | 1200 mm | 800 – 1500 |
| Pallet height | 180 mm | 120 – 300 |
| Fork pocket width | 250 mm | 150 – 350 |
| Fork pocket height | 80 mm | 50 – 140 |
| Fork pocket bottom clearance | 20 mm | 10 – 80 |
| Fork pocket Y from edge | 300 mm | 150 – 500 |
| Mounting hole diameter | 10 mm | 4 – 20 |
| Front cradle length | 300 mm | 200 – 500 |
| Front cradle width | 200 mm | 120 – 300 |
| Front cradle height | 150 mm | 80 – 250 |
| Front cradle pocket length | 160 mm | 80 – 280 |
| Front cradle pocket width | 140 mm | 60 – 200 |
| Front cradle pocket depth | 60 mm | 20 – 120 |
| Rear block length | 350 mm | 200 – 500 |
| Rear block width | 180 mm | 120 – 300 |
| Rear block height | 120 mm | 80 – 220 |
| Rear locating notch length | 120 mm | 40 – 250 |
| Rear locating notch depth | 40 mm | 10 – 100 |
| Station 1 front cradle X center | 350 mm | 100 – 1200 |
| Station 1 rear block X center | 900 mm | 300 – 1500 |
| Station 2 front cradle X center | 1400 mm | 800 – 2000 |
| Station 2 rear block X center | 1950 mm | 1200 – 2300 |
| Support Y center | 600 mm | 200 – 1000 |
| Support/pallet overlap depth | 5 mm | 1 – 20 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Table
Make a table of height 45 cm
旋转式卷烟陈列架
物件名称： 旋转式卷烟陈列架（带语音播报） 整体形态： 一个圆柱形、可360度旋转的立式展示架。 整体高度为1380mm，直径为600mm。 底部配有4个带刹车的万向轮，方便移动和固定。 结构分层（从下往上）： 底座（0-200mm高度）： 底部为圆柱形底座，高200mm。 外层采用网格状设计（类似金属网孔或菱形网格）。 底座内部中空，用于内置音箱设备。
Haul‑off Reel
Make this haul off reel, the dimensions of it should be a 2 meter diameter circle shaper with 0.7 meter width, i have attached a picture of what it looks like