Ramp Block with Pocket and Feet

1 views

Bounding box: 120 × 50 × 60 mm
Engine: 3D Printing B-rep
Parameters: 17
Published: November 1, 2026

Download

Free to download and use. See the terms.

The prompt

create 3d model

Parameters

Name	Value	Range
Length	120 mm	60 – 200
Depth	50 mm	20 – 120
Height at tall end	60 mm	20 – 150
Height at short end	34 mm	10 – 140
Pocket width	34 mm	10 – 70
Pocket height	24 mm	6 – 50
Pocket depth into face	12 mm	2 – 30
Pocket centre offset from mid-length	26 mm	-60 – 60
Pocket bottom above base	20 mm	4 – 80
Channel width	12 mm	4 – 40
Channel depth below sloped face	14 mm	3 – 40
Channel centre offset from mid-length	-18 mm	-60 – 60
Step height	12 mm	2 – 30
Step depth into face	16 mm	2 – 30
Foot length	16 mm	4 – 40
Gap between the two feet	12 mm	2 – 40
Offset of first foot from short end	0 mm	0 – 60

Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.

More models

Browse the full gallery →

600.0 × 400.0 × 450.0 mmPrecision

Table

Make a table of height 45 cm

STEPSTLGLB5 PARAMS

700.6 × 2000.6 × 2000.0 mmPrecision

Haul‑off Reel

Make this haul off reel, the dimensions of it should be a 2 meter diameter circle shaper with 0.7 meter width, i have attached a picture of what it looks like

STEPSTLGLB6 PARAMS

664.7 × 664.7 × 1380.1 mmPrecision

旋转式卷烟陈列架

物件名称：旋转式卷烟陈列架（带语音播报）整体形态：一个圆柱形、可360度旋转的立式展示架。整体高度为1380mm，直径为600mm。底部配有4个带刹车的万向轮，方便移动和固定。结构分层（从下往上）：底座（0-200mm高度）：底部为圆柱形底座，高200mm。外层采用网格状设计（类似金属网孔或菱形网格）。底座内部中空，用于内置音箱设备。

STEPSTLGLB24 PARAMS