Rainwater Harvesting Filter System

1 views

Bounding box: 328 × 400 × 969 mm
Engine: 3D Printing B-rep
Parameters: 17
Published: November 5, 2026

Download

Free to download and use. See the terms.

The prompt

create me a water harvesting system design, with water filter using small pebbles, coarse sand, gravel, activated charcoal, fine sand, coarse stone, and pebbles ( in that order). create it through a gutter from a house, make the filter to a small drum that then goes to bigger drum (for harvest water), use tubes to connect the two drums and the gutter to filter.

Parameters

Name	Value	Range
Storage drum diameter	300 mm	150 – 600
Storage drum height	420 mm	150 – 900
Filter drum diameter	190 mm	120 – 300
Filter drum height	250 mm	150 – 450
Gutter length	400 mm	150 – 1200
Gutter radius	45 mm	25 – 80
Downpipe drop	180 mm	90 – 600
Small pebbles layer	30 mm	10 – 60
Coarse sand layer	24 mm	10 – 60
Gravel layer	26 mm	10 – 60
Activated charcoal layer	24 mm	10 – 60
Fine sand layer	20 mm	10 – 60
Coarse stone layer	26 mm	10 – 60
Pebbles layer	24 mm	10 – 60
Wall thickness	3 mm	1.2 – 6
Lid thickness	12 mm	6 – 25
Funnel height between drums	80 mm	40 – 200

Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.

More models

Browse the full gallery →

600.0 × 400.0 × 450.0 mmPrecision

Table

Make a table of height 45 cm

STEPSTLGLB5 PARAMS

700.6 × 2000.6 × 2000.0 mmPrecision

Haul‑off Reel

Make this haul off reel, the dimensions of it should be a 2 meter diameter circle shaper with 0.7 meter width, i have attached a picture of what it looks like

STEPSTLGLB6 PARAMS

664.7 × 664.7 × 1380.1 mmPrecision

旋转式卷烟陈列架

物件名称：旋转式卷烟陈列架（带语音播报）整体形态：一个圆柱形、可360度旋转的立式展示架。整体高度为1380mm，直径为600mm。底部配有4个带刹车的万向轮，方便移动和固定。结构分层（从下往上）：底座（0-200mm高度）：底部为圆柱形底座，高200mm。外层采用网格状设计（类似金属网孔或菱形网格）。底座内部中空，用于内置音箱设备。

STEPSTLGLB24 PARAMS