Everything else
RadiationD ESP32 D3 Dosimeter Case
- Bounding box
- 110 × 60 × 12.5 mm
- Engine
- 3D Printing B-rep
- Parameters
- 27
- Published
- November 6, 2026
Download
Free to download and use. See the terms.
The prompt
Корпус для дозиметра на основі RadiationD v1.1 Cajoe та ESP32-D3 Lilygo TTGO, де RadiationD v1.1 трубкою назад, а esp32 стоїть вертикально. Висота приблизно 12міліметрів, довжина щоб вистачило під плати, ширина аналогічно. Lilygo має бути закріплена в корпусі якось. На корпусі має бути виріз під usb-c, та можливість фіксації металевої кришки над radiationd
Parameters
| Name | Value | Range |
|---|---|---|
| Overall body length | 110 mm | 80 – 160 |
| Overall body width | 60 mm | 40 – 100 |
| Overall body height | 12 mm | 8 – 20 |
| Wall thickness | 2 mm | 1.2 – 4 |
| Floor thickness | 2 mm | 1.2 – 5 |
| USB-C cutout width | 9 mm | 6 – 14 |
| USB-C cutout height | 3.4 mm | 2.5 – 6 |
| USB-C cutout center height | 6.5 mm | 3 – 10 |
| Lilygo guide rail length | 17 mm | 5 – 40 |
| Lilygo guide rail height | 3 mm | 1 – 8 |
| Lilygo guide rail thickness | 1.5 mm | 1 – 4 |
| Cover plate length | 70 mm | 40 – 100 |
| Cover plate width | 22 mm | 15 – 40 |
| Cover plate thickness | 1 mm | 0.6 – 3 |
| Cover rear margin | 3 mm | 0 – 10 |
| Screw hole inset from cover ends | 8 mm | 4 – 15 |
| Screw hole inset from cover sides | 5 mm | 3 – 10 |
| Cover screw clearance hole | 2.2 mm | 1.8 – 4 |
| Body screw boss diameter | 5 mm | 3 – 8 |
| Body pilot hole diameter | 1.8 mm | 1.4 – 3 |
| Pilot hole depth from body top | 6 mm | 3 – 10 |
| Clamp length along X | 16 mm | 10 – 30 |
| Clamp width across Y | 12 mm | 8 – 30 |
| Clamp height | 8 mm | 4 – 14 |
| Lilygo PCB thickness | 1.6 mm | 1 – 3 |
| Slot clearance total | 0.6 mm | 0.2 – 2 |
| Solid base under slot | 2 mm | 1 – 5 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Table
Make a table of height 45 cm
Haul‑off Reel
Make this haul off reel, the dimensions of it should be a 2 meter diameter circle shaper with 0.7 meter width, i have attached a picture of what it looks like
旋转式卷烟陈列架
物件名称： 旋转式卷烟陈列架（带语音播报） 整体形态： 一个圆柱形、可360度旋转的立式展示架。 整体高度为1380mm，直径为600mm。 底部配有4个带刹车的万向轮，方便移动和固定。 结构分层（从下往上）： 底座（0-200mm高度）： 底部为圆柱形底座，高200mm。 外层采用网格状设计（类似金属网孔或菱形网格）。 底座内部中空，用于内置音箱设备。
Deck with U-Shape and Stairs
ARE THOSE ALL THE SAME DEMETNIONS THT I GAVE YOU IN THE FIRST MESSAGE
Three-Phase Asynchronous Motor 7.5 kW
moteur asynchome triphasé 7.5kw 1500tr/mn
Bánh răng trụ thẳng Ø14 – lỗ Ø6.5
Tạo cho tôi 1 bánh răng đường kính 14 lỗ 6.5mm