Brackets and mounts
Radar Tower Enclosure Parts
- Bounding box
- 710.0 × 100.0 × 244.0 mm
- Engine
- Precision B-rep
- Parameters
- 47
- Published
- October 26, 2026
Download
Free to download and use. See the terms.
The prompt
Design a professional 3D-printable tower enclosure for a Year 10 science fair project using an HLK-LD2450 radar sensor, an ESP32 DevKit, and an iPhone 15 Pro with a slim Apple silicone case. **Overall size:** approximately 170 × 100 × 200 mm. Use a clean, modern rectangular design with rounded edges. **Radar mount:** Place the radar at the top front, with an approximately 55 × 55 mm unobstructed opening. Include a secure mount that does not cover the antenna. **ESP32 compartment:** Create a ventilated lower compartment with space for the ESP32 board, USB cable access, and wiring. **Phone holder:** Add a front-facing tray sized for an iPhone 15 Pro with its case. Include side supports and a secure bottom lip, leaving the screen and USB-C port accessible. **Cable management:** Include a channel connecting the ESP32 compartment to the phone tray. Make the parts easy to assemble and practical to print on a Prusa 3D printer using PLA. Avoid supports where possible. Export separate STL files for each part. Prioritise correct dimensions, sturdy construction, and easy access to the electronics. Do not block the radar's sensing area.
Parameters
| Name | Value | Range |
|---|---|---|
| Layout Gap | 30 mm | 5 – 100 |
| Tower Width | 170 mm | 100 – 300 |
| Tower Depth | 100 mm | 50 – 200 |
| Tower Height | 200 mm | 100 – 400 |
| Wall Thickness | 2.4 mm | 1 – 5 |
| Radar Cutout Size | 58 mm | 20 – 100 |
| Radar Top Margin | 25 mm | 5 – 50 |
| ESP32 Opening Width | 94 mm | 50 – 150 |
| ESP32 Opening Height | 64 mm | 30 – 100 |
| ESP32 Opening Bottom | 20 mm | 5 – 50 |
| Vent Slot Count | 5 | 1 – 10 |
| Vent Slot Width | 4 mm | 2 – 10 |
| Vent Slot Height | 30 mm | 10 – 60 |
| Vent Slot Spacing | 12 mm | 5 – 30 |
| Vent Slot Z | 50 mm | 10 – 150 |
| Boss Diameter | 6 mm | 3 – 12 |
| Boss Height | 5 mm | 2 – 15 |
| Bezel Width | 70 mm | 40 – 120 |
| Bezel Height | 70 mm | 40 – 120 |
| Bezel Thickness | 10 mm | 2 – 20 |
| Bezel Opening | 55 mm | 20 – 100 |
| Panel Width | 100 mm | 50 – 200 |
| Panel Height | 70 mm | 40 – 150 |
| Panel Thickness | 3 mm | 1 – 10 |
| Slot Count | 5 | 1 – 10 |
| Slot Width | 4 mm | 2 – 10 |
| Slot Height | 50 mm | 10 – 60 |
| Slot Spacing | 12 mm | 5 – 30 |
| USB Notch Width | 20 mm | 5 – 40 |
| USB Notch Height | 10 mm | 2 – 20 |
| Screw Hole Dia | 3.4 mm | 2 – 5 |
| Screw Inset | 10 mm | 5 – 20 |
| Tray Width | 160 mm | 100 – 250 |
| Tray Height | 88 mm | 50 – 150 |
| Tray Depth | 18 mm | 8 – 40 |
| Cavity Width | 153 mm | 80 – 240 |
| Cavity Height | 78 mm | 40 – 140 |
| Cavity Depth | 13 mm | 5 – 30 |
| Lip Height | 8 mm | 2 – 20 |
| Lip Thickness | 3 mm | 1 – 10 |
| USB Cutout Width | 10 mm | 5 – 20 |
| USB Cutout Height | 5 mm | 2 – 15 |
| Cover Width | 90 mm | 40 – 150 |
| Cover Height | 24 mm | 10 – 60 |
| Cover Thickness | 3 mm | 1 – 10 |
| Screw Hole Dia | 3.4 mm | 2 – 5 |
| Screw Inset | 10 mm | 5 – 30 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Trumpet Lyre Mount Main Body
A single 3D mechanical CAD part for a trumpet music lyre mount (Main Body with Paddle). Geometry details: 1. A 18mm-wide semi-cylindrical clamp arc for a 28mm diameter cylinder, w
UAV Ogive Nose Cone
Design a watertight, 3D-printable aerodynamic nose cone module for a fixed-wing tactical UAV, optimized for printing in Carbon Fiber Filled PETG (PETG-CF). The base of the nose con
Flat-Strap Reel Spool
Create a 3D model of a custom flat-strap reel spool for a home plate housing cavity. Geometry: - A reel spool consisting of two parallel circular outer flanges connected by a cent
PET Recycling Kiosk Frame
Design a production-ready welded steel frame for an outdoor PET bottle recycling and animal feeding kiosk. Create ONLY the steel frame. Do not create covers, motors, tanks, electr
Kugoo G2 Pro Rear Swingarm for KuKirin G4
Create a detailed 1:1 CAD drawing of custom rear swingarms for the Kugoo G2 Pro 2020 electric scooter. The swingarms must be designed to fit a KuKirin G4 hub motor instead of the o
Humanoid Robot Exploded Assembly
Design a 3D CAD model of a fully autonomous humanoid biped robot for the Robofest AI HOMO BOT competition. Dimensions Height: 800 mm (80 cm) Maximum weight: 20 kg Lightweight modu