Brackets and mounts
Rack Rear X-Brace Assembly
- Bounding box
- 10556.8 × 167.0 × 117.4 mm
- Engine
- Precision B-rep
- Parameters
- 29
- Published
- November 2, 2026
Download
Free to download and use. See the terms.
The prompt
Create a complete parametric CAD model and fabrication drawing package for the following assembly. PROJECT: Verse Agile Rack Rear X-Brace Anti-Sway Assembly Revision A OUTPUT REQUIRED: 1. 3D parametric assembly model 2. Individual part models 3. Exploded assembly view 4. ANSI 11x17 fabrication drawings 5. Dimensioned PDF drawing package 6. STEP export 7. Native CAD assembly format 8. DXF flat patterns for fabricated plate parts CAD STANDARD: - ANSI drawing standard - Inch units - Third angle projection - General tolerance: ±0.030 inch unless specified - All edges deburred - Include weld symbols and fabrication notes ASSEMBLY CONFIGURATION: Removable rear X-brace triangulation system Upper mounts: pinned clevis connections Lower mounts: removable clamped connections One diagonal includes adjustable tension preload mechanism RACK DATUM: Coordinate origin: Rack centerline Floor plane KEY LOCATIONS: Upper Left Mount: X = -23.50 in Y = 0 Z = 61.00 in Upper Right Mount: X = +23.50 in Y = 0 Z = 61.00 in Lower Left Clamp: X = -23.50 in Y = 0 Z = 0 Lower Right Clamp: X = +23.50 in Y = 0 Z = 0 RACK PARAMETERS: Outside rack width: 49.00 in Lower rack tube: 2.00 x 2.00 in square tube Lower clamp spacing: 47.00 in center-to-center PART DETAILS: ITEM 1 — Upper Clevis Pin Assembly Quantity: 2 Material: 4140 steel preferred Finish: Zinc plated Dimensions: Pin diameter: Ø0.500 in Overall length: 2.750 in Grip length: 1.750 in Retention: R-clip or ball detent
Parameters
| Name | Value | Range |
|---|---|---|
| Pin Diameter (mm) | 12.7 mm | 8 – 20 |
| Pin Overall Length (mm) | 69.85 mm | 40 – 100 |
| Grip Length (mm) | 44.45 mm | 20 – 80 |
| Cross‑Hole Diameter (mm) | 3.18 mm | 2 – 6 |
| Hole Distance from End (mm) | 12.7 mm | 5 – 30 |
| Wire Diameter (mm) | 2.5 mm | 1 – 4 |
| Leg Length (mm) | 25 mm | 15 – 40 |
| Loop Radius (mm) | 6.25 mm | 4 – 12 |
| Tube Width (mm) | 38.1 mm | 30 – 60 |
| Tube Height (mm) | 19.05 mm | 15 – 30 |
| Wall Thickness (mm) | 3.18 mm | 2 – 5 |
| Brace Overall Length (mm) | 1397 mm | 1000 – 2000 |
| Ear Plate Thickness (mm) | 6.35 mm | 3 – 10 |
| Ear Width (Y direction) (mm) | 50 mm | 30 – 80 |
| Ear Height (Z) (mm) | 38.1 mm | 25 – 60 |
| Ear Hole Diameter (mm) | 12.7 mm | 10 – 15 |
| Ear Protrusion in X (mm) | 30 mm | 15 – 50 |
| Gap Between Ears (mm) | 19.05 mm | 10 – 30 |
| Body Length (mm) | 101.6 mm | 50 – 200 |
| Body Outer Diameter (mm) | 31.75 mm | 20 – 60 |
| Rod Diameter (mm) | 12.7 mm | 8 – 20 |
| Clamp Tube Size (side) (mm) | 50.8 mm | 40 – 80 |
| Clamp Wall Thickness (mm) | 6.35 mm | 3 – 10 |
| Clamp Body Length (Y) (mm) | 100 mm | 60 – 150 |
| Clamp Ear Thickness (mm) | 6.35 mm | 3 – 10 |
| Clamp Ear Hole Diameter (mm) | 12.7 mm | 10 – 15 |
| Clamp Bolt Diameter (mm) | 6.35 mm | 4 – 10 |
| Clamp Ear Gap (mm) | 19.05 mm | 10 – 30 |
| Layout Gap between Parts (mm) | 1500 mm | 500 – 3000 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →UAV Ogive Nose Cone
Design a watertight, 3D-printable aerodynamic nose cone module for a fixed-wing tactical UAV, optimized for printing in Carbon Fiber Filled PETG (PETG-CF). The base of the nose con
Trumpet Lyre Mount Main Body
A single 3D mechanical CAD part for a trumpet music lyre mount (Main Body with Paddle). Geometry details: 1. A 18mm-wide semi-cylindrical clamp arc for a 28mm diameter cylinder, w
Flat-Strap Reel Spool
Create a 3D model of a custom flat-strap reel spool for a home plate housing cavity. Geometry: - A reel spool consisting of two parallel circular outer flanges connected by a cent
PET Recycling Kiosk Frame
Design a production-ready welded steel frame for an outdoor PET bottle recycling and animal feeding kiosk. Create ONLY the steel frame. Do not create covers, motors, tanks, electr
Compression Testing Tower
The central square tower contains a 450 mm lead screw and a parallel 16 mm diameter steel guide shaft. Both are securely supported by bearings. A horizontal sliding block spans be
SG90 2-DOF Robotic Arm Assembly
"Design a compact, 3D-printable 2-DOF robotic arm specifically for a mobile library robot. The arm should consist of a rotating base joint, a lower link, an upper link, and a simpl
