Racing Sailboat Hull

1 views

Bounding box: 180 × 61.7 × 31.8 mm
Engine: 3D Printing B-rep
Parameters: 18
Published: November 3, 2026

Download

Free to download and use. See the terms.

The prompt

Maak een rompvorm van een wedstrijdzeilboot

Parameters

Name	Value	Range
Length overall	180 mm	60 – 400
Maximum beam	62 mm	20 – 150
Hull depth amidships	26 mm	10 – 80
Keel rise at the bow	13 mm	0 – 40
Keel rise at the transom	4.5 mm	0 – 30
Sheer rise at the bow	8 mm	0 – 40
Sheer rise at the transom	4 mm	0 – 30
Station of maximum beam (fraction of LOA)	0.62 mm	0.3 – 0.8
Transom beam / maximum beam	0.85 mm	0.4 – 1
Bow entry fullness exponent	1.3 mm	0.6 – 2.5
Deck crown height	1.6 mm	0 – 5
Cockpit station (fraction of LOA)	0.64 mm	0.3 – 0.85
Cockpit opening length	26 mm	4 – 80
Cockpit opening width	17 mm	4 – 60
Cockpit depth below deck	5 mm	0.5 – 20
Lengthwise stations	44 mm	16 – 100
Side section segments	12 mm	4 – 24
Deck segments	12 mm	2 – 24

Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.

More models

Browse the full gallery →

600.0 × 400.0 × 450.0 mmPrecision

Table

Make a table of height 45 cm

STEPSTLGLB5 PARAMS

700.6 × 2000.6 × 2000.0 mmPrecision

Haul‑off Reel

Make this haul off reel, the dimensions of it should be a 2 meter diameter circle shaper with 0.7 meter width, i have attached a picture of what it looks like

STEPSTLGLB6 PARAMS

664.7 × 664.7 × 1380.1 mmPrecision

旋转式卷烟陈列架

物件名称：旋转式卷烟陈列架（带语音播报）整体形态：一个圆柱形、可360度旋转的立式展示架。整体高度为1380mm，直径为600mm。底部配有4个带刹车的万向轮，方便移动和固定。结构分层（从下往上）：底座（0-200mm高度）：底部为圆柱形底座，高200mm。外层采用网格状设计（类似金属网孔或菱形网格）。底座内部中空，用于内置音箱设备。

STEPSTLGLB24 PARAMS