Everything else
Queen Bed Base with Headboard and Drawers
- Bounding box
- 67.0 × 92.6 × 60.0 mm
- Engine
- Precision B-rep
- Parameters
- 25
- Published
- October 25, 2026
Download
Free to download and use. See the terms.
The prompt
Generate the model inside a single top-level function build(params). Keep the existing base. Add a headboard at one short end of the base, sitting on the floor, with a 1/8" gap from the base. Headboard is 67" W x 9" D x 60" H, centered on the base width. 3" wide full-height side posts with rounded front edges. Open center cavity 42.5" W x 8.25" deep from 22" to 49.5" above the floor. Full-width shelf at 49.5" with open cubbies above it up to the top shelf.
Parameters
| Name | Value | Range |
|---|---|---|
| Base Width | 61 in | 48 – 72 |
| Base Length | 83.5 in | 72 – 96 |
| Base Height | 14.25 in | 10 – 20 |
| Drawer Front Width | 41.7 in | 24 – 48 |
| Drawer Front Height | 14 in | 8 – 18 |
| Drawer Front Thickness | 0.75 in | 0.375 – 1.5 |
| Drawer Front Gap | 0.13 in | 0.0625 – 0.5 |
| Drawers Per Side | 2 | 1 – 4 |
| Drawer Bottom Offset | 0 in | 0 – 1 |
| Groove Width | 16 in | 8 – 24 |
| Groove Height | 0.75 in | 0.25 – 1.5 |
| Groove Depth | 0.25 in | 0.0625 – 0.75 |
| Groove Top Offset | 0.25 in | 0 – 1 |
| Headboard Width | 67 in | 60 – 84 |
| Headboard Depth | 9 in | 6 – 12 |
| Headboard Height | 60 in | 48 – 84 |
| Gap from Base | 0.13 in | 0.0625 – 0.5 |
| Side Post Width | 3 in | 2 – 5 |
| Center Cavity Width | 42.5 in | 24 – 61 |
| Cavity Depth | 8.25 in | 2 – 10 |
| Cavity Bottom Offset | 22 in | 16 – 30 |
| Shelf Height Above Floor | 49.5 in | 40 – 55 |
| Shelf Thickness | 0.75 in | 0.375 – 1.5 |
| Top Shelf Thickness | 0.75 in | 0.375 – 1.5 |
| Post Edge Radius | 0.5 in | 0.125 – 1.25 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Table
Make a table of height 45 cm
Haul‑off Reel
Make this haul off reel, the dimensions of it should be a 2 meter diameter circle shaper with 0.7 meter width, i have attached a picture of what it looks like
旋转式卷烟陈列架
物件名称： 旋转式卷烟陈列架（带语音播报） 整体形态： 一个圆柱形、可360度旋转的立式展示架。 整体高度为1380mm，直径为600mm。 底部配有4个带刹车的万向轮，方便移动和固定。 结构分层（从下往上）： 底座（0-200mm高度）： 底部为圆柱形底座，高200mm。 外层采用网格状设计（类似金属网孔或菱形网格）。 底座内部中空，用于内置音箱设备。
Deck with U-Shape and Stairs
ARE THOSE ALL THE SAME DEMETNIONS THT I GAVE YOU IN THE FIRST MESSAGE
Three-Phase Asynchronous Motor 7.5 kW
moteur asynchome triphasé 7.5kw 1500tr/mn
Bánh răng trụ thẳng Ø14 – lỗ Ø6.5
Tạo cho tôi 1 bánh răng đường kính 14 lỗ 6.5mm