Everything else
Quarter-Cut Hollow Cylinder Arch with Hook
- Bounding box
- 133.2 × 120.7 × 106.2 mm
- Engine
- 3D Printing B-rep
- Parameters
- 10
- Published
- November 5, 2026
Download
Free to download and use. See the terms.
The prompt
The cylinder is hollow on the inside. I only want the a quarter of the cylinder edge. The edge should be an 3/16 of an inch thick. See attached image to see how the side and hook looks. The piece needs to match the arch of the 9.5 inch circle.
Parameters
| Name | Value | Range |
|---|---|---|
| Cylinder diameter (9.5 in) | 241.3 mm | 100 – 400 |
| Cylinder height (2.25 in) | 57.15 mm | 10 – 100 |
| Wall / edge thickness (3/16 in) | 4.76 mm | 1.2 – 12.7 |
| Arc span of the retained band | 90 deg | 10 – 180 |
| Hook outer radius | 20 mm | 5 – 50 |
| Hook inner radius | 12 mm | 2 – 40 |
| Hook opening gap width (0.5 in) | 12.7 mm | 5 – 30 |
| Hook height above the wall top | 50 mm | 10 – 120 |
| Hook position along the arc | 15 deg | 0 – 90 |
| Hook overlap into the wall | 1 mm | 0.5 – 2 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Table
Make a table of height 45 cm
Haul‑off Reel
Make this haul off reel, the dimensions of it should be a 2 meter diameter circle shaper with 0.7 meter width, i have attached a picture of what it looks like
旋转式卷烟陈列架
物件名称： 旋转式卷烟陈列架（带语音播报） 整体形态： 一个圆柱形、可360度旋转的立式展示架。 整体高度为1380mm，直径为600mm。 底部配有4个带刹车的万向轮，方便移动和固定。 结构分层（从下往上）： 底座（0-200mm高度）： 底部为圆柱形底座，高200mm。 外层采用网格状设计（类似金属网孔或菱形网格）。 底座内部中空，用于内置音箱设备。
Deck with U-Shape and Stairs
ARE THOSE ALL THE SAME DEMETNIONS THT I GAVE YOU IN THE FIRST MESSAGE
Three-Phase Asynchronous Motor 7.5 kW
moteur asynchome triphasé 7.5kw 1500tr/mn
Bánh răng trụ thẳng Ø14 – lỗ Ø6.5
Tạo cho tôi 1 bánh răng đường kính 14 lỗ 6.5mm