Quadcopter with Servo Payload Gripper

1 views

Bounding box: 261.7 × 261.7 × 123.0 mm
Engine: Precision B-rep
Parameters: 46
Published: October 13, 2026

Download

Free to download and use. See the terms.

The prompt

now attach a servo-actuated gripper mechanism below the quadcopter for payload release and pick

Parameters

Name	Value	Range
Arm Length	120 mm	60 – 260
Arm Width	22 mm	8 – 60
Frame Plate Thickness	4 mm	2 – 12
Centre Body Diameter	60 mm	30 – 140
Avionics Hub Diameter	50 mm	20 – 120
Avionics Hub Height	25 mm	6 – 60
Motor Pod Diameter	32 mm	12 – 70
Motor Pod Height	22 mm	6 – 60
Motor Shaft Bore	5 mm	2 – 16
Motor Bolt Hole Dia	3 mm	1.5 – 8
Motor Bolt Circle	19 mm	6 – 60
Bolts per Motor	4 count	2 – 8
Guard Outer Dia	92 mm	30 – 200
Guard Inner Dia	85 mm	25 – 190
Guard Ring Thickness	3 mm	1 – 10
Guard Height Above Plate	6 mm	0 – 60
Guard Strut Width	6 mm	2 – 20
Guard Strut Height	4 mm	1 – 20
Skid Rail Length	130 mm	40 – 300
Skid Rail Width	10 mm	3 – 40
Skid Rail Height	8 mm	2 – 30
Skid Rail X Offset	55 mm	15 – 140
Leg Strut Y Offset	55 mm	10 – 140
Leg Strut Diameter	10 mm	3 – 40
Landing Gear Drop	70 mm	10 – 200
Canopy Width	40 mm	10 – 120
Canopy Depth	32 mm	10 – 120
Canopy Height	20 mm	4 – 80
Camera Lens Dia	16 mm	4 – 60
Camera Lens Length	12 mm	2 – 60
Gripper Mount Plate Width	54 mm	20 – 140
Gripper Mount Plate Depth	44 mm	20 – 140
Gripper Mount Plate Thickness	5 mm	2 – 20
Servo Body Width (X)	24 mm	8 – 80
Servo Body Length (Y)	44 mm	8 – 80
Servo Body Height (Z)	26 mm	8 – 80
Bracket / Carrier Wall	4 mm	1.5 – 16
Jaw Carrier Width	54 mm	20 – 140
Jaw Carrier Depth	40 mm	12 – 140
Jaw Carrier Height	14 mm	4 – 60
Jaw Opening (Parallel Gap)	30 mm	6 – 60
Finger Length	22 mm	5 – 100
Finger Depth (Y)	14 mm	4 – 80
Finger Thickness (X)	8 mm	2 – 40
Pivot Pin Diameter	5 mm	1 – 20
Jaw Close Angle	10 deg	0 – 30

Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.

More models

Browse the full gallery →

600.0 × 400.0 × 450.0 mmPrecision

Table

Make a table of height 45 cm

STEPSTLGLB5 PARAMS

700.6 × 2000.6 × 2000.0 mmPrecision

Haul‑off Reel

Make this haul off reel, the dimensions of it should be a 2 meter diameter circle shaper with 0.7 meter width, i have attached a picture of what it looks like

STEPSTLGLB6 PARAMS

664.7 × 664.7 × 1380.1 mmPrecision

旋转式卷烟陈列架

物件名称：旋转式卷烟陈列架（带语音播报）整体形态：一个圆柱形、可360度旋转的立式展示架。整体高度为1380mm，直径为600mm。底部配有4个带刹车的万向轮，方便移动和固定。结构分层（从下往上）：底座（0-200mm高度）：底部为圆柱形底座，高200mm。外层采用网格状设计（类似金属网孔或菱形网格）。底座内部中空，用于内置音箱设备。

STEPSTLGLB24 PARAMS