Everything else
Pyramid Corner Connector
- Bounding box
- 120 × 120 × 88.4 mm
- Engine
- 3D Printing B-rep
- Parameters
- 19
- Published
- November 19, 2026
Download
Free to download and use. See the terms.
The prompt
Design a single-piece, precision-engineered, 3D-printable base corner connector for a modular Great Pyramid of Giza wireframe. DESIGN PHILOSOPHY: The connector must be manufactured as ONE integrated component wherever technically possible. Avoid unnecessary detachable parts, multiple assemblies or separate structural elements. PYRAMID GEOMETRY: - Height: 1,200 mm. - Square base: 1,885 × 1,885 mm. - Inclined rod length: approximately 1,793 mm. - Inclined rod angle: 51.84° relative to horizontal. - Horizontal base rods meet at exactly 90°. INTEGRATED CONSTRUCTION: 1. TWO HORIZONTAL SOCKETS - Positioned at exactly 90°. - Compatible with the universal 30 mm diameter rod connection system. - Incorporate keyed anti-rotation geometry. 2. ONE INCLINED SOCKET - Positioned at exactly 51.84° above the horizontal base plane. - Its horizontal projection must point towards the pyramid's exact centre. - Compatible with the same universal rod connection system. - Incorporate keyed anti-rotation geometry. 3. INTEGRATED FLOOR FOOT - Form part of the same printed connector body. - Wide, flat floor-contact surface. - Low-profile, enlarged footprint for stability. - Incorporate a shallow recessed area for an optional replaceable non-slip rubber pad. - The foot must not alter the theoretical rod centre-line geometry. 4. STRUCTURAL REINFORCEMENT - One continuous reinforced central body. - Generous material around all three socket junctions. - Rounded transitions to minimise stress concentrations. - Reinforced socket walls. - Avoid thin sections and fragile snap-fit features. 5. LOCKING SYSTEM - Incorporate provisions for the universal quarter-turn locking collars and secondary locking pins. - Locking components must prevent accidental rod separation. - Locking mechanisms should remain accessible for manual operation. - Do not require tools or permanent adhesive. GEOMETRICAL ACCURACY: All three rod centre-lines must intersect at the exact theoretical base corner point. The inclined socket must have the correct three-dimensional orientation, not merely the correct inclination angle. All four base connectors must be identical and interchangeable through rotation or mirroring. MANUFACTURING: - Single-piece connector body. - Maximum printer dimensions: 210 × 210 × 250 mm. - Material: PETG prototype, with PA12 nylon considered for production. - Design for FDM printing. - Avoid supports wherever practical without compromising structural integrity. OUTPUT: Generate one watertight, manifold STL for the integrated connector body. Provide a separate STL only for any necessary locking component that cannot be integrated into the body. Do not generate the rods, apex connector or complete pyramid.
Parameters
| Name | Value | Range |
|---|---|---|
| Rod diameter | 30 mm | 20 – 40 |
| Socket wall thickness | 5.5 mm | 3 – 10 |
| Radial clearance per side | 0.25 mm | 0.1 – 0.5 |
| Socket insertion depth from corner point | 48 mm | 30 – 70 |
| Anti-rotation key width | 5 mm | 3 – 8 |
| Anti-rotation key depth | 2 mm | 1 – 4 |
| Inclined rod angle above horizontal | 51.84 deg | 30 – 70 |
| Rod centre intersection above floor | 38 mm | 25 – 60 |
| Central node radius | 26 mm | 18 – 40 |
| Foot square width | 120 mm | 70 – 190 |
| Foot height | 18 mm | 6 – 25 |
| Foot corner radius | 10 mm | 2 – 20 |
| Rubber pad recess diameter | 70 mm | 20 – 140 |
| Rubber pad recess depth | 3 mm | 1 – 8 |
| Quarter-turn collar groove width | 6 mm | 3 – 10 |
| Quarter-turn collar groove depth | 2 mm | 1 – 4 |
| Groove distance from socket mouth | 8 mm | 4 – 20 |
| Secondary locking pin hole diameter | 4.5 mm | 3 – 8 |
| Pin hole distance from socket mouth | 18 mm | 8 – 30 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Table
Make a table of height 45 cm
Haul‑off Reel
Make this haul off reel, the dimensions of it should be a 2 meter diameter circle shaper with 0.7 meter width, i have attached a picture of what it looks like
旋转式卷烟陈列架
物件名称: 旋转式卷烟陈列架(带语音播报) 整体形态: 一个圆柱形、可360度旋转的立式展示架。 整体高度为1380mm,直径为600mm。 底部配有4个带刹车的万向轮,方便移动和固定。 结构分层(从下往上): 底座(0-200mm高度): 底部为圆柱形底座,高200mm。 外层采用网格状设计(类似金属网孔或菱形网格)。 底座内部中空,用于内置音箱设备。
Deck with U-Shape and Stairs
ARE THOSE ALL THE SAME DEMETNIONS THT I GAVE YOU IN THE FIRST MESSAGE
Flip-Top Bottle Cap with Center Hole
我要生成類似瓶蓋跟市售一模一樣 可以上掀蓋然後打開中間會有一個洞
Rounded Rectangular Tray
tôi muốn tạo một khay hình chữ nhật dài khoảng 40x30cm, có gờ của các thành cao lên 4cm, đế dày 2cm và 4 góc được bo tròn
