3D preview of Pyramid Base Corner Connector (3-Socket Keyed)
Loading the interactive model…
Interactive 3D model of Pyramid Base Corner Connector (3-Socket Keyed)

Everything else

Pyramid Base Corner Connector (3-Socket Keyed)

1 views
Bounding box
140.0 × 140.0 × 96.1 mm
Engine
Precision B-rep
Parameters
21
Published
November 19, 2026

Download

Free to download and use. See the terms.

The prompt

Design a single-piece, precision-engineered, 3D-printable base corner connector for a modular Great Pyramid of Giza wireframe. DESIGN PHILOSOPHY: The connector must be manufactured as ONE integrated component wherever technically possible. Avoid unnecessary detachable parts, multiple assemblies or separate structural elements. PYRAMID GEOMETRY: - Height: 1,200 mm. - Square base: 1,885 × 1,885 mm. - Inclined rod length: approximately 1,793 mm. - Inclined rod angle: 51.84° relative to horizontal. - Horizontal base rods meet at exactly 90°. INTEGRATED CONSTRUCTION: 1. TWO HORIZONTAL SOCKETS - Positioned at exactly 90°. - Compatible with the universal 30 mm diameter rod connection system. - Incorporate keyed anti-rotation geometry. 2. ONE INCLINED SOCKET - Positioned at exactly 51.84° above the horizontal base plane. - Its horizontal projection must point towards the pyramid's exact centre. - Compatible with the same universal rod connection system. - Incorporate keyed anti-rotation geometry. 3. INTEGRATED FLOOR FOOT - Form part of the same printed connector body. - Wide, flat floor-contact surface. - Low-profile, enlarged footprint for stability. - Incorporate a shallow recessed area for an optional replaceable non-slip rubber pad. - The foot must not alter the theoretical rod centre-line geometry. 4. STRUCTURAL REINFORCEMENT - One continuous reinforced central body. - Generous material around all three socket junctions. - Rounded transitions to minimise stress concentrations. - Reinforced socket walls. - Avoid thin sections and fragile snap-fit features. 5. LOCKING SYSTEM - Incorporate provisions for the universal quarter-turn locking collars and secondary locking pins. - Locking components must prevent accidental rod separation. - Locking mechanisms should remain accessible for manual operation. - Do not require tools or permanent adhesive. GEOMETRICAL ACCURACY: All three rod centre-lines must intersect at the exact theoretical base corner point. The inclined socket must have the correct three-dimensional orientation, not merely the correct inclination angle. All four base connectors must be identical and interchangeable through rotation or mirroring. MANUFACTURING: - Single-piece connector body. - Maximum printer dimensions: 210 × 210 × 250 mm. - Material: PETG prototype, with PA12 nylon considered for production. - Design for FDM printing. - Avoid supports wherever practical without compromising structural integrity. OUTPUT: Generate one watertight, manifold STL for the integrated connector body. Provide a separate STL only for any necessary locking component that cannot be integrated into the body. Do not generate the rods, apex connector or complete pyramid.

Parameters

NameValueRange
Rod Diameter30 mm10 – 60
Bore Clearance (diametral)0.4 mm0 – 2
Socket Wall Thickness6 mm3 – 15
Socket Length70 mm40 – 120
Rod Stop Depth from Corner Point12 mm4 – 40
Anti-Rotation Keyway Width8 mm2 – 20
Keyway Depth2.5 mm1 – 6
Secondary Lock Pin Hole Dia4.2 mm2 – 10
Lock Pin Hole Offset from Mouth10 mm5 – 40
Collar Groove Width5 mm2 – 15
Collar Groove Depth2 mm0.5 – 5
Collar Groove Offset from Mouth20 mm6 – 50
Inclined Rod Angle51.84 deg30 – 75
Corner Point Height Above Floor28 mm20 – 80
Central Hub Radius38 mm25 – 70
Central Hub Height56 mm30 – 120
Foot Plate Size140 mm90 – 200
Foot Plate Thickness10 mm5 – 25
Foot Corner Radius12 mm0 – 30
Rubber Pad Recess Size80 mm30 – 150
Rubber Pad Recess Depth2.5 mm0.5 – 6

Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.