Brackets and mounts
PVDF pH Probe Immersion Assembly
- Bounding box
- 165.1 × 165.0 × 1660.0 mm
- Engine
- Precision B-rep
- Parameters
- 13
- Published
- August 20, 2026
Download
Free to download and use. See the terms.
The prompt
Create a PVDF pH probe immersion assembly. Material: PVDF. Assembly length from bottom of flange to probe connection: 1700 mm. Top flange: 2 inch DN50 PVDF flange, 20 mm thickness. Main pipe: PVDF pipe, 63 mm outer diameter, 6 mm wall thickness, 51 mm inner diameter. Cable must pass through the inside of the pipe. Bottom adapter: machined solid PVDF adapter, 60 mm outer diameter, 60 mm length. Bottom adapter internal thread: G1 / 1 inch BSPP straight female thread, thread depth 30 mm. Thread is straight, not NPT. Add flat sealing face for PTFE gasket. pH holder will screw into the G1 female thread. Show front view, side view, section view, and isometric view. Add dimensions on the drawing. Flange bolt hole pattern must match existing tank flange. Leave bolt holes as reference unless PN10 / PN16 / ANSI 150 standard is confirmed.
Parameters
| Name | Value | Range |
|---|---|---|
| Flange Outer Diameter | 165 mm | 100 – 250 |
| Flange Inner Diameter | 63 mm | 50 – 80 |
| Flange Thickness | 20 mm | 10 – 30 |
| Flange Bolt Circle Diameter | 125 mm | 100 – 200 |
| Flange Bolt Hole Diameter | 18 mm | 10 – 25 |
| Flange Bolt Count | 4 | 4 – 12 |
| Pipe Outer Diameter | 63 mm | 50 – 100 |
| Pipe Inner Diameter | 51 mm | 40 – 60 |
| Pipe Length | 1640 mm | 1000 – 2000 |
| Adapter Outer Diameter | 60 mm | 50 – 80 |
| Adapter Length | 60 mm | 40 – 80 |
| Thread Hole Diameter | 30.29 mm | 25 – 35 |
| Thread Depth | 30 mm | 10 – 60 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Trumpet Lyre Mount Main Body
A single 3D mechanical CAD part for a trumpet music lyre mount (Main Body with Paddle). Geometry details: 1. A 18mm-wide semi-cylindrical clamp arc for a 28mm diameter cylinder, w
UAV Ogive Nose Cone
Design a watertight, 3D-printable aerodynamic nose cone module for a fixed-wing tactical UAV, optimized for printing in Carbon Fiber Filled PETG (PETG-CF). The base of the nose con
Flat-Strap Reel Spool
Create a 3D model of a custom flat-strap reel spool for a home plate housing cavity. Geometry: - A reel spool consisting of two parallel circular outer flanges connected by a cent