PV-T Microchannel Heat Exchanger (Layered)

1 views

Bounding box: 84 × 69.6 × 24.5 mm
Engine: 3D Printing B-rep
Parameters: 18
Published: November 14, 2026

Download

Free to download and use. See the terms.

The prompt

工程二维线稿，剖面图，小型化光储热智能微流道换热器，黑白矢量图，无填充，线条清晰，适合学术论文。从上至下：光吸收层、相变储热层、平行微通道阵列、底部基板，左右带进出口集流腔，标注太阳光入射箭头、流体进出口、温度传感点位，简洁，工程原理图，不渲染

Parameters

Name	Value	Range
Flow-path length	80 mm	40 – 200
Device width	50 mm	20 – 150
Substrate thickness	4 mm	2 – 10
Microchannel height	3 mm	1 – 8
Microchannel width	1.6 mm	0.8 – 4
Rib width between channels	1.4 mm	0.8 – 4
Parallel microchannels	13 mm	3 – 25
Manifold chamber length	12 mm	6 – 30
PCM layer thickness	6 mm	2 – 15
PCM pocket depth	4 mm	1 – 12
PCM pockets across width	5 mm	1 – 11
Absorber plate thickness	3 mm	1 – 8
Absorber fin height	1 mm	0.2 – 4
Port bore diameter	6 mm	3 – 12
Port boss diameter	12 mm	8 – 24
Port boss height	8 mm	2 – 20
Thermocouple well diameter	2.2 mm	1.5 – 5
Thermocouple well depth	1.2 mm	0.5 – 3

Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.

More models

Browse the full gallery →

600.0 × 400.0 × 450.0 mmPrecision

Table

Make a table of height 45 cm

STEPSTLGLB5 PARAMS

700.6 × 2000.6 × 2000.0 mmPrecision

Haul‑off Reel

Make this haul off reel, the dimensions of it should be a 2 meter diameter circle shaper with 0.7 meter width, i have attached a picture of what it looks like

STEPSTLGLB6 PARAMS

664.7 × 664.7 × 1380.1 mmPrecision

旋转式卷烟陈列架

物件名称：旋转式卷烟陈列架（带语音播报）整体形态：一个圆柱形、可360度旋转的立式展示架。整体高度为1380mm，直径为600mm。底部配有4个带刹车的万向轮，方便移动和固定。结构分层（从下往上）：底座（0-200mm高度）：底部为圆柱形底座，高200mm。外层采用网格状设计（类似金属网孔或菱形网格）。底座内部中空，用于内置音箱设备。

STEPSTLGLB24 PARAMS