Gears and transmission
Puzzle Box Panel
- Bounding box
- 200.0 × 100.0 × 3.0 mm
- Engine
- Precision B-rep
- Parameters
- 6
- Published
- October 3, 2026
Download
Free to download and use. See the terms.
The prompt
Act as a master mechanical engineer, puzzle designer, and expert CAD/SVG programmer. Your task is to generate a comprehensive, error-free 2D vector layout file in a single, clean SVG code block for a complex, 8-move sequential discovery puzzle box. ### 1. Materials & Dimensions - Material: 3.0mm MDF (exactly). All interlocking features, sliding panel tracks, and slot clearances must account for this thickness. - Outer Dimensions: 200mm Width x 100mm Depth x 100mm Height. - Panel Grid Layout: Render all outer and internal mechanism panels flat on a single, neatly arranged 2D canvas with 5mm spacing between all individual parts. ### 2. Laser Processing Layers (Strict Layer Mapping) Ensure every vector path uses a strict CSS stroke styling color so laser software can separate them instantly: - Outer Cut Lines: Red (#FF0000, stroke-width: 0.1mm) - For fully piercing the material. - Internal Mechanism Cuts: Green (#00FF00, stroke-width: 0.1mm) - For sliders, pins, and gears. - Decorative / Clue Engraving: Blue (#0000FF, stroke-width: 0.2mm) - For vector line art texturing and clues.
Parameters
| Name | Value | Range |
|---|---|---|
| Panel Length | 200 mm | 50 – 500 |
| Panel Width | 100 mm | 30 – 300 |
| Panel Thickness | 3 mm | 1 – 12 |
| Slot Width | 3.2 mm | 1 – 10 |
| Slot Length | 20 mm | 5 – 100 |
| Pin Hole Diameter | 5 mm | 2 – 20 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Spur Gearbox
design gearbox
Involute Spur Gear with Keyway
Precision Involute Spur Gear with Hub and Keyway: Module (m) of 2.0 mm, 40 teeth (z), Pitch Circle Diameter (d) of 80.00 mm, 20° pressure angle (\alpha), 15.00 mm face width (b), a
Parametric Helical Gear
Create a parametric helical gear with the following specifications: 32 teeth, normal module of 3 mm, right-hand helix, total face width of 80 mm, and a central bore hole with a dia
Rod with Spur Gear
Metal rod diameter is 20 mm and length is 100 mm and right side attach a gear and their OD is 50 mm
Spur Gear (12 Teeth)
Built a gear with 12 teeth
Two-Stage Spur Gear Reduction Assembly
Design a 2-stage spur gear reduction set for 3D printing with an overall 10:1 ratio. Stage 1: A 12-tooth pinion driving a 36-tooth gear (3:1). Stage 2: A 12-tooth pinion coupled