Pull-Up Bar with Swing Hanger (fully dimensioned)

1 views

Bounding box: 1500.1 × 300.0 × 2960.1 mm
Engine: Precision B-rep
Parameters: 23
Published: October 1, 2026

Download

Free to download and use. See the terms.

The prompt

добавь размеры на модель

Parameters

Name	Value	Range
Post outside diameter	48 mm	20 – 120
Post wall thickness	3.2 mm	1.5 – 15
Post overall length	2800 mm	500 – 5000
Embedment depth below ground	600 mm	100 – 2000
Crossbar centre height above ground	2200 mm	800 – 3000
Post spacing (centre to centre)	1200 mm	400 – 2500
Concrete footing diameter	300 mm	100 – 900
Concrete footing depth	700 mm	100 – 2000
Crossbar outside diameter	33.4 mm	20 – 90
Crossbar wall thickness	3.2 mm	1.5 – 15
Crossbar length	1500 mm	300 – 3200
Tee clamp body wall	6 mm	2 – 25
Tee clamp vertical sleeve height	120 mm	30 – 400
Tee clamp horizontal sleeve length	160 mm	40 – 600
Tee clamp bolt hole diameter	12 mm	4 – 30
Hanger band width	40 mm	10 – 120
Hanger band wall thickness	5 mm	3 – 20
Eye bore diameter	30 mm	6 – 40
Eye outer radius	25 mm	22 – 60
Eye thickness	10 mm	4 – 30
Eye centre drop below crossbar axis	55 mm	45 – 150
Eye bolt stem diameter	14 mm	6 – 40
Hanger spacing (centre to centre)	700 mm	200 – 2000

Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.

More models

Browse the full gallery →

600.0 × 400.0 × 450.0 mmPrecision

Table

Make a table of height 45 cm

STEPSTLGLB5 PARAMS

700.6 × 2000.6 × 2000.0 mmPrecision

Haul‑off Reel

Make this haul off reel, the dimensions of it should be a 2 meter diameter circle shaper with 0.7 meter width, i have attached a picture of what it looks like

STEPSTLGLB6 PARAMS

664.7 × 664.7 × 1380.1 mmPrecision

旋转式卷烟陈列架

物件名称：旋转式卷烟陈列架（带语音播报）整体形态：一个圆柱形、可360度旋转的立式展示架。整体高度为1380mm，直径为600mm。底部配有4个带刹车的万向轮，方便移动和固定。结构分层（从下往上）：底座（0-200mm高度）：底部为圆柱形底座，高200mm。外层采用网格状设计（类似金属网孔或菱形网格）。底座内部中空，用于内置音箱设备。

STEPSTLGLB24 PARAMS