Everything else
Prusa i3 X-Axis Carriage (2x LM8UU, 55mm rods)
- Bounding box
- 60.0 × 28.0 × 80.2 mm
- Engine
- Precision B-rep
- Parameters
- 13
- Published
- September 16, 2026
Download
Free to download and use. See the terms.
The prompt
Tạo cho tôi 1 cái giá đoẽ trục x mây in 3D diy hệ prusa i3 khoảng cách giữa 2 ty trượt là 55mm và chỉ sài 2 bi lm 8uu th
Parameters
| Name | Value | Range |
|---|---|---|
| Rod Spacing (C-C) | 55 mm | 30 – 90 |
| LM8UU Housing Bore | 15.2 mm | 10 – 25 |
| Bearing Housing Length (X) | 26 mm | 18 – 50 |
| Body Depth (Y) | 22 mm | 16 – 45 |
| Wall Above/Below Bearing | 5 mm | 3 – 12 |
| Mount Plate Width (X) | 60 mm | 40 – 100 |
| Mount Plate Height (Z) | 50 mm | 30 – 90 |
| Mount Plate Thickness | 6 mm | 3 – 15 |
| Belt Slot Length (X) | 30 mm | 10 – 50 |
| Belt Slot Height (Z) | 7 mm | 3 – 15 |
| Mounting Hole Diameter | 3.4 mm | 2 – 6.5 |
| Mounting Hole X Offset | 22 mm | 5 – 40 |
| Mounting Hole Z Offset | 18 mm | 5 – 40 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Table
Make a table of height 45 cm
Haul‑off Reel
Make this haul off reel, the dimensions of it should be a 2 meter diameter circle shaper with 0.7 meter width, i have attached a picture of what it looks like
旋转式卷烟陈列架
物件名称： 旋转式卷烟陈列架（带语音播报） 整体形态： 一个圆柱形、可360度旋转的立式展示架。 整体高度为1380mm，直径为600mm。 底部配有4个带刹车的万向轮，方便移动和固定。 结构分层（从下往上）： 底座（0-200mm高度）： 底部为圆柱形底座，高200mm。 外层采用网格状设计（类似金属网孔或菱形网格）。 底座内部中空，用于内置音箱设备。
Deck with U-Shape and Stairs
ARE THOSE ALL THE SAME DEMETNIONS THT I GAVE YOU IN THE FIRST MESSAGE
Three-Phase Asynchronous Motor 7.5 kW
moteur asynchome triphasé 7.5kw 1500tr/mn
Bánh răng trụ thẳng Ø14 – lỗ Ø6.5
Tạo cho tôi 1 bánh răng đường kính 14 lỗ 6.5mm