Brackets and mounts
Prosthetic Foot Assembly
- Bounding box
- 200.0 × 60.0 × 42.0 mm
- Engine
- Precision B-rep
- Parameters
- 28
- Published
- August 9, 2026
Download
Free to download and use. See the terms.
The prompt
Create a lightweight prosthetic foot about 230 mm long. At the top, add a metal connector for attaching the prosthetic leg. Under the connector, add a small moving joint mounted on the base. Add two separate thin carbon fiber plates: * one plate going toward the toes * one plate going toward the heel The front and rear plates should move independently. Add one soft elastomer shock absorber under the front plate and one under the rear plate. Keep the whole mechanism low, narrow, and inside the natural shape of a real human foot. Do not add skin or a cosmetic cover. Show only the mechanical parts.
Parameters
| Name | Value | Range |
|---|---|---|
| Connector Base Width | 30 mm | 20 – 50 |
| Connector Base Depth | 30 mm | 20 – 50 |
| Connector Top Width | 20 mm | 10 – 40 |
| Connector Top Depth | 20 mm | 10 – 40 |
| Connector Height | 40 mm | 20 – 70 |
| Connector Bore Dia | 8 mm | 4 – 16 |
| Base Length | 90 mm | 60 – 120 |
| Base Width | 45 mm | 30 – 60 |
| Base Thickness | 8 mm | 4 – 15 |
| Joint Depth (X) | 20 mm | 10 – 40 |
| Joint Width (Y) | 25 mm | 15 – 40 |
| Joint Height | 15 mm | 5 – 30 |
| Front Plate Length | 130 mm | 80 – 180 |
| Front Plate Width | 60 mm | 30 – 80 |
| Front Plate Thickness | 2 mm | 1 – 5 |
| Front Plate Z (bottom) | 10 mm | 0 – 30 |
| Rear Plate Length | 70 mm | 40 – 100 |
| Rear Plate Width | 55 mm | 30 – 70 |
| Rear Plate Thickness | 2 mm | 1 – 5 |
| Rear Plate Z (bottom) | 12 mm | 0 – 30 |
| Front Absorber Length | 35 mm | 15 – 70 |
| Front Absorber Width | 30 mm | 15 – 50 |
| Front Absorber Thickness | 10 mm | 2 – 20 |
| Front Absorber X Center | 80 mm | 30 – 130 |
| Rear Absorber Length | 30 mm | 10 – 60 |
| Rear Absorber Width | 30 mm | 15 – 50 |
| Rear Absorber Thickness | 12 mm | 2 – 20 |
| Rear Absorber X Center | -45 mm | -90 – -10 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Trumpet Lyre Mount Main Body
A single 3D mechanical CAD part for a trumpet music lyre mount (Main Body with Paddle). Geometry details: 1. A 18mm-wide semi-cylindrical clamp arc for a 28mm diameter cylinder, w
UAV Ogive Nose Cone
Design a watertight, 3D-printable aerodynamic nose cone module for a fixed-wing tactical UAV, optimized for printing in Carbon Fiber Filled PETG (PETG-CF). The base of the nose con
Flat-Strap Reel Spool
Create a 3D model of a custom flat-strap reel spool for a home plate housing cavity. Geometry: - A reel spool consisting of two parallel circular outer flanges connected by a cent