Brackets and mounts
Prosthetic Foot Assembly
- Bounding box
- 230.0 × 246.5 × 78.8 mm
- Engine
- Precision B-rep
- Parameters
- 32
- Published
- August 9, 2026
Download
Free to download and use. See the terms.
The prompt
Create a lightweight prosthetic foot about 230 mm long. At the top, add a metal connector for attaching the prosthetic leg. Under the connector, add a small moving joint mounted on the base. Add two separate thin carbon fiber plates: * one plate going toward the toes * one plate going toward the heel The front and rear plates should move independently. Add one soft elastomer shock absorber under the front plate and one under the rear plate. Keep the whole mechanism low, narrow, and inside the natural shape of a real human foot. Do not add skin or a cosmetic cover. Show only the mechanical parts.
Parameters
| Name | Value | Range |
|---|---|---|
| Base Length | 230 mm | 180 – 300 |
| Base Width | 40 mm | 30 – 60 |
| Base Thickness | 10 mm | 5 – 20 |
| Joint Y Position | 115 mm | 50 – 180 |
| Joint Axis Width | 20 mm | 10 – 30 |
| Joint Pin Diameter | 10 mm | 5 – 15 |
| Joint Overall Height | 30 mm | 20 – 50 |
| Joint Flange Length | 40 mm | 20 – 60 |
| Joint Flange Width | 20 mm | 10 – 40 |
| Connector Base Side | 40 mm | 30 – 60 |
| Connector Top Side | 25 mm | 15 – 40 |
| Connector Height | 35 mm | 25 – 50 |
| Front Plate Length | 120 mm | 80 – 150 |
| Front Plate Width | 40 mm | 30 – 50 |
| Front Plate Thickness | 2 mm | 1 – 4 |
| Front Plate Start Y | 100 mm | 50 – 150 |
| Front Plate Start Z | 20 mm | 10 – 30 |
| Front Plate Tip Offset | 10 mm | 0 – 20 |
| Rear Plate Length | 80 mm | 50 – 120 |
| Rear Plate Width | 35 mm | 25 – 50 |
| Rear Plate Thickness | 2 mm | 1 – 4 |
| Rear Plate Start Y | 0 mm | 0 – 50 |
| Rear Plate Start Z | 20 mm | 10 – 30 |
| Rear Plate Tip Offset | 4 mm | 0 – 10 |
| Front Pad Length | 20 mm | 10 – 30 |
| Front Pad Width | 20 mm | 10 – 30 |
| Front Pad Height | 10 mm | 5 – 20 |
| Front Pad Y Position | 160 mm | 80 – 200 |
| Rear Pad Length | 20 mm | 10 – 30 |
| Rear Pad Width | 20 mm | 10 – 30 |
| Rear Pad Height | 10 mm | 5 – 20 |
| Rear Pad Y Position | 40 mm | 10 – 70 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Trumpet Lyre Mount Main Body
A single 3D mechanical CAD part for a trumpet music lyre mount (Main Body with Paddle). Geometry details: 1. A 18mm-wide semi-cylindrical clamp arc for a 28mm diameter cylinder, w
UAV Ogive Nose Cone
Design a watertight, 3D-printable aerodynamic nose cone module for a fixed-wing tactical UAV, optimized for printing in Carbon Fiber Filled PETG (PETG-CF). The base of the nose con
Flat-Strap Reel Spool
Create a 3D model of a custom flat-strap reel spool for a home plate housing cavity. Geometry: - A reel spool consisting of two parallel circular outer flanges connected by a cent