Brackets and mounts
Project Box Assembly
- Bounding box
- 170.0 × 150.0 × 62.0 mm
- Engine
- Precision B-rep
- Parameters
- 20
- Published
- August 29, 2026
Download
Free to download and use. See the terms.
The prompt
`"Create a 3D-printable two-part project box with external dimensions of 170mm (length) x 150mm (width) x 60mm (height) and a wall thickness of exactly 2mm. Split the box into a base enclosure and a separate top lid, joined by integrated M3 screw pillars at all four corners so they align perfectly.On one of the shorter (150mm wide) walls of the base, add a centered panel cutout for a 3-pin IEC C14 power socket (27.5mm wide x 20mm high rectangular cutout with two 3.5mm flange screw holes spaced 40mm apart). Right next to this IEC cutout on the same wall, add a rectangular cutout for a panel-mount ON/OFF slide switch.The top lid must be completely flat and solid with no pre-made cutouts or holes. Add parallel ventilation slot cutouts on the remaining blank side walls of the base to provide cooling for internal 12V and 24V SMPS units."`
Parameters
| Name | Value | Range |
|---|---|---|
| Box Length | 170 mm | 100 – 300 |
| Box Width | 150 mm | 80 – 250 |
| Box Height | 60 mm | 30 – 120 |
| Wall Thickness | 2 mm | 1 – 5 |
| Lid Thickness | 2 mm | 1 – 5 |
| IEC Cutout Width | 27.5 mm | 20 – 35 |
| IEC Cutout Height | 20 mm | 15 – 25 |
| IEC Screw Hole Dia | 3.5 mm | 2 – 5 |
| IEC Screw Spacing | 40 mm | 30 – 50 |
| Switch Cutout Width | 20 mm | 10 – 30 |
| Switch Cutout Height | 12 mm | 8 – 20 |
| Switch Offset from Center | 38 mm | 30 – 55 |
| Vent Slots per Side | 5 count | 2 – 8 |
| Vent Slot Length | 60 mm | 30 – 120 |
| Vent Slot Width | 3 mm | 2 – 6 |
| Vent Slot Spacing | 9 mm | 6 – 12 |
| Pillar Outer Dia | 7 mm | 5 – 10 |
| Pillar Bore Dia (M3 Tap) | 2.5 mm | 2 – 4 |
| Pillar Inset from Wall | 5 mm | 4 – 10 |
| Pillar Bore Depth | 15 mm | 8 – 25 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Trumpet Lyre Mount Main Body
A single 3D mechanical CAD part for a trumpet music lyre mount (Main Body with Paddle). Geometry details: 1. A 18mm-wide semi-cylindrical clamp arc for a 28mm diameter cylinder, w
UAV Ogive Nose Cone
Design a watertight, 3D-printable aerodynamic nose cone module for a fixed-wing tactical UAV, optimized for printing in Carbon Fiber Filled PETG (PETG-CF). The base of the nose con
Flat-Strap Reel Spool
Create a 3D model of a custom flat-strap reel spool for a home plate housing cavity. Geometry: - A reel spool consisting of two parallel circular outer flanges connected by a cent