Everything else
Printable Quadplane VTOL (2438 mm span)
- Bounding box
- 1990.4 × 1264.5 × 310 mm
- Engine
- 3D Printing B-rep
- Parameters
- 27
- Published
- November 2, 2026
Download
Free to download and use. See the terms.
The prompt
Printable quadplane VTOL: 2438 mm span, 1300 mm length, 376 mm height, 850x850 mm VTOL motor layout, pusher motor, conventional tail. Sectioned into bed-sized pieces with electronics bays.
Parameters
| Name | Value | Range |
|---|---|---|
| Wingspan | 2438 mm | 1600 – 3000 |
| Fuselage width | 200 mm | 160 – 260 |
| Fuselage height | 200 mm | 160 – 260 |
| Belly height above ground | 110 mm | 60 – 200 |
| Fuselage section length, keep under your print bed | 210 mm | 150 – 250 |
| Fuselage wall | 1.6 mm | 1.2 – 3 |
| Wing root chord | 300 mm | 200 – 340 |
| Wing tip chord | 200 mm | 120 – 300 |
| Main spar position along fuselage | 830 mm | 700 – 950 |
| Airfoil thickness ratio | 0.12 mm | 0.08 – 0.16 |
| Airfoil camber ratio | 0.02 mm | 0 – 0.04 |
| Wing skin thickness | 1.2 mm | 0.8 – 2 |
| Carbon spar tube OD | 10 mm | 6 – 16 |
| Left-right motor spacing | 850 mm | 500 – 1000 |
| Front-rear motor spacing | 850 mm | 500 – 1000 |
| Front motor position from tail | 1135 mm | 900 – 1200 |
| VTOL propeller diameter | 330 mm | 200 – 400 |
| Carbon boom tube OD | 16 mm | 10 – 24 |
| Motor diameter | 45 mm | 30 – 60 |
| Horizontal stabilizer span | 733 mm | 400 – 1000 |
| Stabilizer root chord | 150 mm | 100 – 220 |
| Stabilizer tip chord | 100 mm | 60 – 160 |
| Stabilizer spar position | 170 mm | 120 – 260 |
| Pusher propeller diameter | 332 mm | 200 – 400 |
| Vertical fin top height | 360 mm | 300 – 370 |
| Battery width | 55 mm | 40 – 80 |
| Battery length | 150 mm | 100 – 170 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Table
Make a table of height 45 cm
Haul‑off Reel
Make this haul off reel, the dimensions of it should be a 2 meter diameter circle shaper with 0.7 meter width, i have attached a picture of what it looks like
旋转式卷烟陈列架
物件名称： 旋转式卷烟陈列架（带语音播报） 整体形态： 一个圆柱形、可360度旋转的立式展示架。 整体高度为1380mm，直径为600mm。 底部配有4个带刹车的万向轮，方便移动和固定。 结构分层（从下往上）： 底座（0-200mm高度）： 底部为圆柱形底座，高200mm。 外层采用网格状设计（类似金属网孔或菱形网格）。 底座内部中空，用于内置音箱设备。
Deck with U-Shape and Stairs
ARE THOSE ALL THE SAME DEMETNIONS THT I GAVE YOU IN THE FIRST MESSAGE
Three-Phase Asynchronous Motor 7.5 kW
moteur asynchome triphasé 7.5kw 1500tr/mn
Bánh răng trụ thẳng Ø14 – lỗ Ø6.5
Tạo cho tôi 1 bánh răng đường kính 14 lỗ 6.5mm