Everything else
Print-in-Place Toy Car
- Bounding box
- 80.0 × 52.2 × 24.0 mm
- Engine
- Precision B-rep
- Parameters
- 13
- Published
- October 7, 2026
Download
Free to download and use. See the terms.
The prompt
Design and print in place car STL file
Parameters
| Name | Value | Range |
|---|---|---|
| Body Length (X) | 80 mm | 40 – 200 |
| Chassis Width (Y) | 30 mm | 16 – 80 |
| Chassis Height (Z) | 15 mm | 6 – 60 |
| Cab Length | 34 mm | 10 – 140 |
| Cab Width | 22 mm | 8 – 70 |
| Cab Height | 9 mm | 2 – 40 |
| Cab Offset (X) | -6 mm | -50 – 50 |
| Wheel Diameter | 24 mm | 8 – 80 |
| Wheel Width | 8 mm | 2 – 30 |
| Axle Diameter | 5 mm | 2 – 20 |
| Axle Head Diameter | 10 mm | 4 – 30 |
| Axle Head Thickness | 2.5 mm | 1 – 8 |
| Print Clearance (per side) | 0.3 mm | 0.1 – 1 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Table
Make a table of height 45 cm
Haul‑off Reel
Make this haul off reel, the dimensions of it should be a 2 meter diameter circle shaper with 0.7 meter width, i have attached a picture of what it looks like
旋转式卷烟陈列架
物件名称： 旋转式卷烟陈列架（带语音播报） 整体形态： 一个圆柱形、可360度旋转的立式展示架。 整体高度为1380mm，直径为600mm。 底部配有4个带刹车的万向轮，方便移动和固定。 结构分层（从下往上）： 底座（0-200mm高度）： 底部为圆柱形底座，高200mm。 外层采用网格状设计（类似金属网孔或菱形网格）。 底座内部中空，用于内置音箱设备。
Deck with U-Shape and Stairs
ARE THOSE ALL THE SAME DEMETNIONS THT I GAVE YOU IN THE FIRST MESSAGE
Three-Phase Asynchronous Motor 7.5 kW
moteur asynchome triphasé 7.5kw 1500tr/mn
Bánh răng trụ thẳng Ø14 – lỗ Ø6.5
Tạo cho tôi 1 bánh răng đường kính 14 lỗ 6.5mm