Everything else
Print-In-Place Sphere Box with Snap Lid
- Bounding box
- 160.0 × 45.0 × 33.2 mm
- Engine
- Precision B-rep
- Parameters
- 20
- Published
- October 21, 2026
Download
Free to download and use. See the terms.
The prompt
The spheres should each sit in a hole that comes up half way to each one.
Parameters
| Name | Value | Range |
|---|---|---|
| Box Length | 160 mm | 60 – 300 |
| Box Width | 40 mm | 25 – 120 |
| Box Height | 30 mm | 15 – 80 |
| Wall Thickness | 2.5 mm | 1 – 6 |
| Floor Thickness | 3 mm | 1.5 – 10 |
| Sphere Diameter | 19.12 mm | 5 – 40 |
| Sphere Clearance (per side) | 0.2 mm | 0.05 – 1 |
| Sphere Count | 5 pcs | 1 – 8 |
| Sphere Pitch (centre-to-centre) | 30 mm | 20 – 60 |
| Socket Rim Height (half-way up sphere) | 9.76 mm | 3 – 20 |
| Seat Pedestal Rim Wall | 2 mm | 0.8 – 6 |
| Gap Sphere Top to Lid Inner Face | 2.5 mm | 0.5 – 10 |
| Lid Plate Thickness | 3 mm | 1.5 – 8 |
| Front Lip Protrusion | 2 mm | 0.5 – 5 |
| Front Lip Height | 2 mm | 0.5 – 6 |
| Snap Hook Width | 12 mm | 3 – 40 |
| Snap Hook Side Gap | 1 mm | 0.2 – 3 |
| Snap Hook Thickness | 2 mm | 0.8 – 5 |
| Snap Barb Depth | 1 mm | 0.2 – 3 |
| Print-In-Place Gap (lid to box) | 0.2 mm | 0.1 – 1 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Table
Make a table of height 45 cm
Haul‑off Reel
Make this haul off reel, the dimensions of it should be a 2 meter diameter circle shaper with 0.7 meter width, i have attached a picture of what it looks like
旋转式卷烟陈列架
物件名称： 旋转式卷烟陈列架（带语音播报） 整体形态： 一个圆柱形、可360度旋转的立式展示架。 整体高度为1380mm，直径为600mm。 底部配有4个带刹车的万向轮，方便移动和固定。 结构分层（从下往上）： 底座（0-200mm高度）： 底部为圆柱形底座，高200mm。 外层采用网格状设计（类似金属网孔或菱形网格）。 底座内部中空，用于内置音箱设备。
Deck with U-Shape and Stairs
ARE THOSE ALL THE SAME DEMETNIONS THT I GAVE YOU IN THE FIRST MESSAGE
Three-Phase Asynchronous Motor 7.5 kW
moteur asynchome triphasé 7.5kw 1500tr/mn
Bánh răng trụ thẳng Ø14 – lỗ Ø6.5
Tạo cho tôi 1 bánh răng đường kính 14 lỗ 6.5mm