Everything else
Pressure Field Footprint Plate
- Bounding box
- 280.0 × 10.0 × 85.0 mm
- Engine
- Precision B-rep
- Parameters
- 6
- Published
- November 2, 2026
Download
Free to download and use. See the terms.
The prompt
Sketch Mode → pick the X-Z plane (the horizontal plane, since X=length, Z=width, Y=up). Draw a rectangle roughly: X from 20 to 300 (~280 mm long), Z from −235 to −150 (~105 mm wide). These match your pressure field's footprint so the CSV maps on directly. Exit sketch → Pull the rectangle up to ~5 mm thickness (extrude in Y). Position it so its top face is at Y ≈ 64 (matching where the aligned pressure field sits). So extrude from Y=54 up to Y=64, or draw the sketch at Y=54 and pull +10.
Parameters
| Name | Value | Range |
|---|---|---|
| X Min | 20 mm | 0 – 1000 |
| X Max | 300 mm | 20 – 2000 |
| Z Min | -235 mm | -500 – 0 |
| Z Max | -150 mm | -500 – 0 |
| Y Min (bottom) | 54 mm | 0 – 200 |
| Y Max (top) | 64 mm | 0 – 200 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Table
Make a table of height 45 cm
Haul‑off Reel
Make this haul off reel, the dimensions of it should be a 2 meter diameter circle shaper with 0.7 meter width, i have attached a picture of what it looks like
旋转式卷烟陈列架
物件名称： 旋转式卷烟陈列架（带语音播报） 整体形态： 一个圆柱形、可360度旋转的立式展示架。 整体高度为1380mm，直径为600mm。 底部配有4个带刹车的万向轮，方便移动和固定。 结构分层（从下往上）： 底座（0-200mm高度）： 底部为圆柱形底座，高200mm。 外层采用网格状设计（类似金属网孔或菱形网格）。 底座内部中空，用于内置音箱设备。
Deck with U-Shape and Stairs
ARE THOSE ALL THE SAME DEMETNIONS THT I GAVE YOU IN THE FIRST MESSAGE
Three-Phase Asynchronous Motor 7.5 kW
moteur asynchome triphasé 7.5kw 1500tr/mn
Bánh răng trụ thẳng Ø14 – lỗ Ø6.5
Tạo cho tôi 1 bánh răng đường kính 14 lỗ 6.5mm