Pressed Mounting Plate with Domed Centre and Back Relief

1 views

Bounding box: 180 × 205 × 6.5 mm
Engine: 3D Printing B-rep
Parameters: 22
Published: October 30, 2026

Download

Free to download and use. See the terms.

The prompt

on the opposite side the cylindrical shape should indent and the part that it rests on should protrude out as seen here

Parameters

Name	Value	Range
Plate width	180 mm	40 – 400
Plate length	205 mm	40 – 400
Plate thickness	3 mm	1 – 8
Corner radius	12 mm	2 – 40
Corner hole diameter	6 mm	2 – 14
Corner hole centre inset	14 mm	5 – 50
Indentation opening width	85 mm	20 – 200
Indentation opening length	158 mm	20 – 300
Indentation depth	1.5 mm	0.4 – 6
Indentation corner radius	6 mm	1 – 30
Dome width	26 mm	8 – 90
Dome length	140 mm	20 – 280
Dome height above floor	3.5 mm	1 – 30
Depth of matching dent on the far side	3.5 mm	0.5 – 12
Slot width	10 mm	3 – 40
Slot length	23 mm	5 – 80
Slot centre offset	28 mm	5 – 90
Slot pitch along length	55 mm	10 – 100
Centre hole diameter	12 mm	3 – 30
Small hole diameter	6 mm	2 – 20
Inner small hole offset	31 mm	5 – 90
Outer small hole offset	62 mm	5 – 110

Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.

More models

Browse the full gallery →

600.0 × 400.0 × 450.0 mmPrecision

Table

Make a table of height 45 cm

STEPSTLGLB5 PARAMS

700.6 × 2000.6 × 2000.0 mmPrecision

Haul‑off Reel

Make this haul off reel, the dimensions of it should be a 2 meter diameter circle shaper with 0.7 meter width, i have attached a picture of what it looks like

STEPSTLGLB6 PARAMS

664.7 × 664.7 × 1380.1 mmPrecision

旋转式卷烟陈列架

物件名称：旋转式卷烟陈列架（带语音播报）整体形态：一个圆柱形、可360度旋转的立式展示架。整体高度为1380mm，直径为600mm。底部配有4个带刹车的万向轮，方便移动和固定。结构分层（从下往上）：底座（0-200mm高度）：底部为圆柱形底座，高200mm。外层采用网格状设计（类似金属网孔或菱形网格）。底座内部中空，用于内置音箱设备。

STEPSTLGLB24 PARAMS