Brackets and mounts
Press-Fit Battery Holder with Dovetail Base
- Bounding box
- 60.0 × 57.0 × 16.0 mm
- Engine
- Precision B-rep
- Parameters
- 12
- Published
- September 7, 2026
Download
Free to download and use. See the terms.
The prompt
Modular press-fit battery holder designed for 2S 450mAh LiPo batteries. The flat horizontal base plate features vertical, open-faced U-shaped tension clips with top tips curving inward to grip the battery. Internal width between arms is 14mm with 1.5mm wall thickness. The underside (bottom face) of the base plate must have a recessed female dovetail groove shifted 2mm to the left of the center. CRITICAL GEOMETRY: This female groove must be a trapezoidal undercut, meaning the slot opening at the bottom surface is narrower than the inside roof of the groove, creating a locking channel for a sliding male part. No protruding connectors.
Parameters
| Name | Value | Range |
|---|---|---|
| Base Length | 60 mm | 40 – 100 |
| Base Width | 40 mm | 30 – 80 |
| Base Thickness | 4 mm | 2 – 8 |
| Clip Inner Width | 14 mm | 10 – 20 |
| Clip Wall Thickness | 1.5 mm | 1 – 3 |
| Clip Height | 12 mm | 8 – 20 |
| Clip Length | 30 mm | 20 – 50 |
| Tip Curve Radius | 2 mm | 1 – 4 |
| Dovetail Offset from Center | 2 mm | 0 – 10 |
| Dovetail Top Width | 8 mm | 5 – 15 |
| Dovetail Depth | 3 mm | 2 – 6 |
| Dovetail Angle (deg) | 60 deg | 45 – 75 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Trumpet Lyre Mount Main Body
A single 3D mechanical CAD part for a trumpet music lyre mount (Main Body with Paddle). Geometry details: 1. A 18mm-wide semi-cylindrical clamp arc for a 28mm diameter cylinder, w
UAV Ogive Nose Cone
Design a watertight, 3D-printable aerodynamic nose cone module for a fixed-wing tactical UAV, optimized for printing in Carbon Fiber Filled PETG (PETG-CF). The base of the nose con
Flat-Strap Reel Spool
Create a 3D model of a custom flat-strap reel spool for a home plate housing cavity. Geometry: - A reel spool consisting of two parallel circular outer flanges connected by a cent