Loading the interactive model…
Interactive 3D model of Power Bank CasingEverything else
Power Bank Casing
10 views
- Bounding box
- 84.0 × 44.0 × 17.0 mm
- Engine
- Precision B-rep
- Parameters
- 16
- Published
- August 23, 2026
Download
Free to download and use. See the terms.
The prompt
Make me a power bank casing accordingly. The circuit board is shown in the image by isometric and bottom view.
Parameters
| Name | Value | Range |
|---|---|---|
| Board Length (X) | 80 mm | 50 – 120 |
| Board Width (Y) | 40 mm | 30 – 80 |
| Board Thickness (Z) | 15 mm | 8 – 25 |
| Wall Thickness | 2 mm | 1 – 4 |
| Corner Radius | 3 mm | 0 – 8 |
| Display Window Length | 38 mm | 20 – 60 |
| Display Window Width | 16 mm | 10 – 30 |
| Display Center X | -15 mm | -40 – 40 |
| Display Center Y | 0 mm | -20 – 20 |
| Button Hole Diameter | 5 mm | 2 – 10 |
| Button Spacing (Y) | 8 mm | 2 – 15 |
| Button Center X | 25 mm | -40 – 40 |
| USB-C Cutout Width | 10 mm | 5 – 20 |
| USB-C Cutout Height | 4 mm | 2 – 8 |
| Yellow Terminal Cutout Width | 16 mm | 8 – 30 |
| Yellow Terminal Cutout Height | 6 mm | 2 – 12 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Table
Make a table of height 45 cm
STEPSTLGLB5 PARAMS
旋转式卷烟陈列架
物件名称： 旋转式卷烟陈列架（带语音播报） 整体形态： 一个圆柱形、可360度旋转的立式展示架。 整体高度为1380mm，直径为600mm。 底部配有4个带刹车的万向轮，方便移动和固定。 结构分层（从下往上）： 底座（0-200mm高度）： 底部为圆柱形底座，高200mm。 外层采用网格状设计（类似金属网孔或菱形网格）。 底座内部中空，用于内置音箱设备。
STEPSTLGLB24 PARAMS
Haul‑off Reel
Make this haul off reel, the dimensions of it should be a 2 meter diameter circle shaper with 0.7 meter width, i have attached a picture of what it looks like
STEPSTLGLB6 PARAMS