Loading the interactive model…
Interactive 3D model of Power Bank Case Lower ShellEverything else
Power Bank Case Lower Shell
5 views
- Bounding box
- 135.0 × 72.0 × 22.0 mm
- Engine
- Precision B-rep
- Parameters
- 15
- Published
- August 23, 2026
Download
Free to download and use. See the terms.
The prompt
Make me a power bank casing accordingly. The circuit board is shown in the image by isometric and bottom view.
Parameters
| Name | Value | Range |
|---|---|---|
| Case Length | 135 mm | 80 – 200 |
| Case Width | 72 mm | 45 – 120 |
| Case Height | 22 mm | 16 – 40 |
| Wall Thickness | 2 mm | 1 – 4 |
| Corner Radius | 6 mm | 1 – 20 |
| Port Cutout Count | 2 count | 1 – 4 |
| Port Cutout Width | 12.5 mm | 3 – 25 |
| Port Cutout Height | 8 mm | 2 – 20 |
| Port Spacing | 20 mm | 5 – 50 |
| Port Center Height | 10 mm | 4 – 30 |
| PCB Boss Diameter | 6 mm | 4 – 12 |
| PCB Boss Height | 4 mm | 1 – 10 |
| PCB Boss Inset from Walls | 7 mm | 2 – 20 |
| Screw Hole Diameter | 2 mm | 1 – 4 |
| Screw Hole Depth | 3 mm | 1 – 5 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Table
Make a table of height 45 cm
STEPSTLGLB5 PARAMS
旋转式卷烟陈列架
物件名称： 旋转式卷烟陈列架（带语音播报） 整体形态： 一个圆柱形、可360度旋转的立式展示架。 整体高度为1380mm，直径为600mm。 底部配有4个带刹车的万向轮，方便移动和固定。 结构分层（从下往上）： 底座（0-200mm高度）： 底部为圆柱形底座，高200mm。 外层采用网格状设计（类似金属网孔或菱形网格）。 底座内部中空，用于内置音箱设备。
STEPSTLGLB24 PARAMS
Haul‑off Reel
Make this haul off reel, the dimensions of it should be a 2 meter diameter circle shaper with 0.7 meter width, i have attached a picture of what it looks like
STEPSTLGLB6 PARAMS