Loading the interactive model…
Interactive 3D model of Poseable Hexapod Leg (3-DOF, indexed joints)Everything else
Poseable Hexapod Leg (3-DOF, indexed joints)
1 views
- Bounding box
- 150.8 × 40.0 × 96.2 mm
- Engine
- Precision B-rep
- Parameters
- 31
- Published
- September 12, 2026
Download
Free to download and use. See the terms.
The prompt
make it so that i can move it along the legs so that i can move as i need to make a working model
Parameters
| Name | Value | Range |
|---|---|---|
| Yaw Bearing Bore | 6 mm | 3 – 20 |
| Yaw Barrel Dia | 14 mm | 8 – 30 |
| Yaw Barrel Height | 16 mm | 6 – 40 |
| Hip Pivot Bore | 5 mm | 2 – 15 |
| Hip Knuckle Dia | 16 mm | 8 – 30 |
| Knee Pivot Bore | 5 mm | 2 – 15 |
| Knee Knuckle Dia | 16 mm | 8 – 30 |
| Coxa Length | 30 mm | 15 – 70 |
| Coxa Height | 12 mm | 6 – 30 |
| Coxa Width | 12 mm | 6 – 30 |
| Femur Length | 70 mm | 30 – 140 |
| Femur Angle (down from horizontal) | 30 deg | 5 – 80 |
| Tibia Length | 60 mm | 25 – 140 |
| Tibia Angle (down from horizontal) | 55 deg | 5 – 85 |
| Limb Beam Height | 14 mm | 8 – 30 |
| Limb Beam Width | 12 mm | 6 – 30 |
| Mount Flange Dia | 40 mm | 20 – 80 |
| Mount Flange Thickness | 4 mm | 2 – 12 |
| Mount Bolt-Circle Dia | 28 mm | 14 – 70 |
| Mount Hole Dia (M3) | 3.2 mm | 1.5 – 8 |
| Mount Hole Count | 4 pcs | 3 – 8 |
| Lightening Hole Dia | 6 mm | 2 – 16 |
| Foot Pad Dia | 10 mm | 4 – 24 |
| Foot Pad Height | 8 mm | 2 – 20 |
| Index Arc Radius | 13 mm | 6 – 30 |
| Index Pin Hole Dia (M3) | 3 mm | 1.5 – 6 |
| Index Holes per Joint | 5 pcs | 3 – 9 |
| Index Arc Span | 40 deg | 10 – 90 |
| Ankle Slide Slot Length | 18 mm | 6 – 40 |
| Ankle Slide Slot Width | 4 mm | 2 – 10 |
| Slot Position (frac of tibia from knee) | 0.75 - | 0.4 – 0.92 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Table
Make a table of height 45 cm
STEPSTLGLB5 PARAMS
旋转式卷烟陈列架
物件名称： 旋转式卷烟陈列架（带语音播报） 整体形态： 一个圆柱形、可360度旋转的立式展示架。 整体高度为1380mm，直径为600mm。 底部配有4个带刹车的万向轮，方便移动和固定。 结构分层（从下往上）： 底座（0-200mm高度）： 底部为圆柱形底座，高200mm。 外层采用网格状设计（类似金属网孔或菱形网格）。 底座内部中空，用于内置音箱设备。
STEPSTLGLB24 PARAMS
Haul‑off Reel
Make this haul off reel, the dimensions of it should be a 2 meter diameter circle shaper with 0.7 meter width, i have attached a picture of what it looks like
STEPSTLGLB6 PARAMS