Brackets and mounts
Portable Anti-Drone System Prototype
- Bounding box
- 160.0 × 120.0 × 157.0 mm
- Engine
- Precision B-rep
- Parameters
- 22
- Published
- September 11, 2026
Download
Free to download and use. See the terms.
The prompt
A clean, high-resolution 3D CAD render of a portable anti-drone system prototype. The device features a clear acrylic and aluminum extrusion frame. Mounted on top is a 2-axis brushless motor gimbal holding a small camera module and an IMU sensor. Below the gimbal, a Raspberry Pi compute board and an RTL-SDR USB dongle are visible, neatly wired together with Teflon cables. Thin, orange Kapton heating pads are attached to the electronics. Studio lighting, white background, highly detailed, octane render, industrial design, 8k resolution.
Parameters
| Name | Value | Range |
|---|---|---|
| Frame Length | 160 mm | 100 – 250 |
| Frame Width | 120 mm | 80 – 200 |
| Frame Height | 80 mm | 50 – 150 |
| Extrusion Profile | 10 mm | 6 – 20 |
| Gimbal Base Diameter | 35 mm | 20 – 60 |
| Gimbal Base Height | 12 mm | 8 – 25 |
| Bracket Width | 50 mm | 30 – 80 |
| Bracket Height | 35 mm | 20 – 60 |
| Bracket Thickness | 5 mm | 3 – 10 |
| Camera Diameter | 22 mm | 10 – 40 |
| Camera Length | 60 mm | 30 – 100 |
| Electronics Box Length | 85 mm | 50 – 120 |
| Electronics Box Width | 56 mm | 30 – 80 |
| Electronics Box Height | 20 mm | 10 – 30 |
| Kapton Pad Length | 40 mm | 20 – 60 |
| Kapton Pad Width | 25 mm | 10 – 40 |
| Kapton Pad Thickness | 1.5 mm | 0.5 – 3 |
| SDR Dongle Length | 50 mm | 30 – 80 |
| SDR Dongle Width | 15 mm | 10 – 25 |
| SDR Dongle Height | 10 mm | 5 – 15 |
| IMU Sensor Size | 15 mm | 8 – 25 |
| IMU Sensor Height | 5 mm | 2 – 10 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Trumpet Lyre Mount Main Body
A single 3D mechanical CAD part for a trumpet music lyre mount (Main Body with Paddle). Geometry details: 1. A 18mm-wide semi-cylindrical clamp arc for a 28mm diameter cylinder, w
UAV Ogive Nose Cone
Design a watertight, 3D-printable aerodynamic nose cone module for a fixed-wing tactical UAV, optimized for printing in Carbon Fiber Filled PETG (PETG-CF). The base of the nose con
Flat-Strap Reel Spool
Create a 3D model of a custom flat-strap reel spool for a home plate housing cavity. Geometry: - A reel spool consisting of two parallel circular outer flanges connected by a cent