Brackets and mounts
Portable Agricultural Inspection Machine
- Bounding box
- 790.0 × 490.0 × 564.8 mm
- Engine
- Precision B-rep
- Parameters
- 35
- Published
- August 26, 2026
Download
Free to download and use. See the terms.
The prompt
Create a realistic human-designed portable agricultural inspection machine, 450 mm long × 350 mm wide × 250 mm high. Use a simple rectangular aluminum-frame chassis with four 160 mm rubber wheels and realistic brackets, axles and bolts. Add a 500 mm vertical aluminum sensor mast at the rear-center. Mount a small forward/downward-facing crop camera at the top and a small temperature/humidity sensor enclosure below it. Add a small 150 mm × 100 mm farmer display on an angled bracket at the front. Add a detachable soil-moisture probe beside the chassis with a cable. Add a central electronics enclosure for Raspberry Pi, ESP32 and battery, plus a small optional irrigation pump. Make it manually movable, compact and realistically manufacturable from aluminum profiles, sheet metal and 3D-printed brackets. Human engineering prototype style, matte dark gray body, natural aluminum frame, simple practical geometry. No futuristic styling, no tracks, no robotic arm, no LiDAR, no autonomous navigation, no large water tank. Create a complete assembled three-quarter isometric CAD model with all components physically mounted.
Parameters
| Name | Value | Range |
|---|---|---|
| Chassis Length | 450 mm | 300 – 800 |
| Chassis Width | 350 mm | 250 – 600 |
| Chassis Height | 250 mm | 100 – 500 |
| Baseplate Thickness | 10 mm | 5 – 20 |
| Aluminum Profile Size | 30 mm | 20 – 60 |
| Wheel Diameter | 160 mm | 100 – 300 |
| Wheel Width | 40 mm | 20 – 80 |
| Wheel Axle X Offset | 40 mm | 10 – 100 |
| Wheel Side Offset | 30 mm | 0 – 80 |
| Axle Radius | 6 mm | 3 – 15 |
| Wheel Bracket Width | 40 mm | 20 – 80 |
| Wheel Bracket Height | 20 mm | 10 – 50 |
| Sensor Mast Height | 500 mm | 200 – 1000 |
| Sensor Mast Diameter | 40 mm | 20 – 80 |
| Sensor Mast Wall Thickness | 4 mm | 2 – 10 |
| Camera Width | 50 mm | 20 – 100 |
| Camera Depth | 50 mm | 20 – 100 |
| Camera Height | 40 mm | 20 – 80 |
| Camera Tilt Angle | 30 deg | 0 – 60 |
| Sensor Enclosure Width | 60 mm | 30 – 120 |
| Sensor Enclosure Depth | 50 mm | 20 – 100 |
| Sensor Enclosure Height | 30 mm | 20 – 80 |
| Display Width | 150 mm | 80 – 250 |
| Display Height | 100 mm | 60 – 200 |
| Display Thickness | 15 mm | 5 – 30 |
| Display Tilt Angle | -45 deg | -60 – 60 |
| Display Mount Height | 230 mm | 100 – 400 |
| Soil Probe Length | 200 mm | 100 – 400 |
| Soil Probe Diameter | 12 mm | 6 – 25 |
| Probe Handle Width | 30 mm | 20 – 80 |
| Cable Coil Radius | 50 mm | 30 – 100 |
| Cable Diameter | 8 mm | 4 – 15 |
| Electronics Enclosure Length | 220 mm | 120 – 400 |
| Electronics Enclosure Width | 160 mm | 100 – 300 |
| Electronics Enclosure Height | 100 mm | 50 – 200 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Trumpet Lyre Mount Main Body
A single 3D mechanical CAD part for a trumpet music lyre mount (Main Body with Paddle). Geometry details: 1. A 18mm-wide semi-cylindrical clamp arc for a 28mm diameter cylinder, w
UAV Ogive Nose Cone
Design a watertight, 3D-printable aerodynamic nose cone module for a fixed-wing tactical UAV, optimized for printing in Carbon Fiber Filled PETG (PETG-CF). The base of the nose con
Flat-Strap Reel Spool
Create a 3D model of a custom flat-strap reel spool for a home plate housing cavity. Geometry: - A reel spool consisting of two parallel circular outer flanges connected by a cent