Loading the interactive model…
Interactive 3D model of Porous Plate Sensor RampEverything else
Porous Plate Sensor Ramp
5 views
- Bounding box
- 260.0 × 63.0 × 8.0 mm
- Engine
- Precision B-rep
- Parameters
- 15
- Published
- August 26, 2026
Download
Free to download and use. See the terms.
The prompt
Necesito que me diseñes una rampa quiero que me diseñes una rampa para colocar una placa porosa de dimensiones 248x51x2 donde deben ir 30 sensores, y los sensores miden 38x1,52x4mm
Parameters
| Name | Value | Range |
|---|---|---|
| Plate Length | 248 mm | 100 – 400 |
| Plate Width | 51 mm | 20 – 200 |
| Plate Thickness | 2 mm | 0.5 – 10 |
| Sensor Length | 38 mm | 10 – 80 |
| Sensor Width | 1.52 mm | 0.5 – 10 |
| Sensor Height | 4 mm | 1 – 20 |
| Sensor Count | 30 count | 2 – 60 |
| Sensor Spacing (center-to-center) | 8 mm | 2 – 20 |
| Slot Clearance XY | 0.1 mm | 0 – 1 |
| Slot Clearance Z | 0.5 mm | 0 – 2 |
| Floor Thickness (below slots) | 1.5 mm | 0 – 5 |
| Base Margin (around plate) | 6 mm | 2 – 20 |
| Mount Hole Diameter | 5 mm | 2 – 10 |
| Mount Hole Inset from Edge | 4 mm | 2 – 15 |
| Edge Chamfer | 1 mm | 0 – 3 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Table
Make a table of height 45 cm
STEPSTLGLB5 PARAMS
旋转式卷烟陈列架
物件名称： 旋转式卷烟陈列架（带语音播报） 整体形态： 一个圆柱形、可360度旋转的立式展示架。 整体高度为1380mm，直径为600mm。 底部配有4个带刹车的万向轮，方便移动和固定。 结构分层（从下往上）： 底座（0-200mm高度）： 底部为圆柱形底座，高200mm。 外层采用网格状设计（类似金属网孔或菱形网格）。 底座内部中空，用于内置音箱设备。
STEPSTLGLB24 PARAMS
Haul‑off Reel
Make this haul off reel, the dimensions of it should be a 2 meter diameter circle shaper with 0.7 meter width, i have attached a picture of what it looks like
STEPSTLGLB6 PARAMS