Pocket Candy Flask

1 views

Bounding box: 148 × 36 × 133 mm
Engine: 3D Printing B-rep
Parameters: 20
Published: November 9, 2026

Download

Free to download and use. See the terms.

The prompt

the body width can only be a max of about 150mm, if that means i cant have 5 pockets, that is fine. Put however many pockets is possible with that width. I adjusted the height to 120mm

Parameters

Name	Value	Range
Body width	148 mm	60 – 150
Body depth	36 mm	28 – 60
Body height	120 mm	50 – 160
Body edge rounding	6 mm	2 – 12
Number of pockets	4 mm	1 – 6
Pocket diameter	24 mm	10 – 35
Pocket spacing	35 mm	25 – 50
Base thickness	3 mm	2 – 6
Neck outer diameter	28 mm	14 – 40
Neck height	10 mm	4 – 20
Lid outer diameter	33 mm	18 – 45
Lid height	13 mm	6 – 22
Lid top wall thickness	2 mm	1.2 – 4
Thread clearance	0.25 mm	0.1 – 0.5
Thread ridge diameter	1.4 mm	0.6 – 2.5
Thread pitch	2.5 mm	1 – 5
Label recess width	12 mm	4 – 25
Label recess height	50 mm	4 – 90
Label recess depth	0.8 mm	0.4 – 1.5
Label recess centre height	60 mm	10 – 110

Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.

More models

Browse the full gallery →

600.0 × 400.0 × 450.0 mmPrecision

Table

Make a table of height 45 cm

STEPSTLGLB5 PARAMS

700.6 × 2000.6 × 2000.0 mmPrecision

Haul‑off Reel

Make this haul off reel, the dimensions of it should be a 2 meter diameter circle shaper with 0.7 meter width, i have attached a picture of what it looks like

STEPSTLGLB6 PARAMS

664.7 × 664.7 × 1380.1 mmPrecision

旋转式卷烟陈列架

物件名称：旋转式卷烟陈列架（带语音播报）整体形态：一个圆柱形、可360度旋转的立式展示架。整体高度为1380mm，直径为600mm。底部配有4个带刹车的万向轮，方便移动和固定。结构分层（从下往上）：底座（0-200mm高度）：底部为圆柱形底座，高200mm。外层采用网格状设计（类似金属网孔或菱形网格）。底座内部中空，用于内置音箱设备。

STEPSTLGLB24 PARAMS