Pneumatic Cylinder End Cap

1 views

Bounding box: 70.0 × 70.0 × 28.0 mm
Engine: Precision B-rep
Parameters: 10
Published: October 2, 2026

Download

Free to download and use. See the terms.

The prompt

Item 5: Pneumatic Cylinder End Cap  Objective: Apply geometric dimensioning and tolerancing (GD&T) alongside internal threading and port details.  Specifications: o Rectangular block profile: 70mm x 70 mm, thickness 25 mm. o Central Port: Threaded port opening equivalent to G 1/4 or M12 x 1.25 thread depth 12 mm. o Tie-rod holes: Four (4) corner holes of Ø 8.5mm located 10 mm from outer edges. o Pilot Step: Concentric locating boss Ø 50 mm with a height of 3 mm.  Required Views: Top orthographic view, bottom view, and detailed cross-section highlighting thread depth and concentricity tolerance (TP 0.05 mm).

Parameters

Name	Value	Range
Block Width	70 mm	40 – 100
Block Height	70 mm	40 – 100
Block Thickness	25 mm	15 – 40
Boss Diameter	50 mm	30 – 65
Boss Height	3 mm	1 – 10
Tie-rod Hole Diameter	8.5 mm	6 – 12
Tie-rod Hole Offset from Edge	10 mm	6 – 15
Thread Nominal Diameter	12 mm	6 – 20
Thread Pitch	1.25 mm	0.5 – 2
Thread Depth	12 mm	5 – 20

Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.

More models

Browse the full gallery →

600.0 × 400.0 × 450.0 mmPrecision

Table

Make a table of height 45 cm

STEPSTLGLB5 PARAMS

700.6 × 2000.6 × 2000.0 mmPrecision

Haul‑off Reel

Make this haul off reel, the dimensions of it should be a 2 meter diameter circle shaper with 0.7 meter width, i have attached a picture of what it looks like

STEPSTLGLB6 PARAMS

664.7 × 664.7 × 1380.1 mmPrecision

旋转式卷烟陈列架

物件名称：旋转式卷烟陈列架（带语音播报）整体形态：一个圆柱形、可360度旋转的立式展示架。整体高度为1380mm，直径为600mm。底部配有4个带刹车的万向轮，方便移动和固定。结构分层（从下往上）：底座（0-200mm高度）：底部为圆柱形底座，高200mm。外层采用网格状设计（类似金属网孔或菱形网格）。底座内部中空，用于内置音箱设备。

STEPSTLGLB24 PARAMS