Pliers Shelf Assembly

Overall Dimensions: Shelf width: 500 mm Shelf depth: 200 mm Front lip height: 50 mm Shelf Plate: Rectangular plate, 500 mm wide and 200 mm deep. Thickness: 3–4 mm (standard steel plate). Material: Steel. Front Lip: A vertical front lip running the full width of the shelf. Lip height: 50 mm. Lip thickness: same as plate (3–4 mm). Lip is perpendicular to the shelf plate. Pliers Rods: Number of rods: 4. Rod length: 50 mm, protruding forward horizontally. Rod diameter: 6–8 mm round bar. Rods are mounted under the shelf plate, aligned with the front lip. Rods are evenly spaced across the 500 mm width. Approx. spacing: 125 mm center‑to‑center. Rods should be centered horizontally and aligned in a straight line. Assembly Notes: Rods are welded to the underside of the top plate and to the inner face of the front lip. All rods protrude exactly 50 mm forward. Lip height matches rod length (50 mm). Geometry should be modeled as solid bodies. Output Requirements: Generate a 3D CAD model of the shelf assembly. Include the shelf plate, front lip, and 4 rods as solid bodies. Export the final model as a 3D PDF or standard PDF drawing if supported. Use millimeters as units.

Parameters

Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.