Brackets and mounts
Plate with Cutout and Support Rails
- Bounding box
- 139.5 × 80.0 × 7.0 mm
- Engine
- Precision B-rep
- Parameters
- 10
- Published
- November 2, 2026
Download
Free to download and use. See the terms.
The prompt
Modify the existing model. Create two support rails. Each rail shall be located on the left and right inner edge of the cutout. Rail length: 55 mm. Rail width: 3 mm. Rail height: 3 mm. Position each rail centered along the cutout length. The rails extend upward from the base plate. Do not modify: - cutout - mounting holes - outer dimensions Generate editable parameters for: rail length rail width rail height
Parameters
| Name | Value | Range |
|---|---|---|
| Plate Length | 100 mm | 20 – 500 |
| Plate Width | 80 mm | 20 – 400 |
| Plate Thickness | 4 mm | 1 – 20 |
| Hole Diameter | 5 mm | 2 – 20 |
| Hole Offset | 10 mm | 2 – 100 |
| Cutout Length | 133.5 mm | 10 – 400 |
| Cutout Width | 74.5 mm | 10 – 300 |
| Rail Length | 55 mm | 10 – 200 |
| Rail Width | 3 mm | 1 – 20 |
| Rail Height | 3 mm | 1 – 20 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Trumpet Lyre Mount Main Body
A single 3D mechanical CAD part for a trumpet music lyre mount (Main Body with Paddle). Geometry details: 1. A 18mm-wide semi-cylindrical clamp arc for a 28mm diameter cylinder, w
UAV Ogive Nose Cone
Design a watertight, 3D-printable aerodynamic nose cone module for a fixed-wing tactical UAV, optimized for printing in Carbon Fiber Filled PETG (PETG-CF). The base of the nose con
Flat-Strap Reel Spool
Create a 3D model of a custom flat-strap reel spool for a home plate housing cavity. Geometry: - A reel spool consisting of two parallel circular outer flanges connected by a cent
PET Recycling Kiosk Frame
Design a production-ready welded steel frame for an outdoor PET bottle recycling and animal feeding kiosk. Create ONLY the steel frame. Do not create covers, motors, tanks, electr
Kugoo G2 Pro Rear Swingarm for KuKirin G4
Create a detailed 1:1 CAD drawing of custom rear swingarms for the Kugoo G2 Pro 2020 electric scooter. The swingarms must be designed to fit a KuKirin G4 hub motor instead of the o
Humanoid Robot Exploded Assembly
Design a 3D CAD model of a fully autonomous humanoid biped robot for the Robofest AI HOMO BOT competition. Dimensions Height: 800 mm (80 cm) Maximum weight: 20 kg Lightweight modu