Gears and transmission
Planetary Gearbox Outer Casing
- Bounding box
- 100.0 × 100.0 × 60.0 mm
- Engine
- Precision B-rep
- Parameters
- 9
- Published
- October 22, 2026
Download
Free to download and use. See the terms.
The prompt
Parametric Planetary Gearbox Outer Casing: Outer diameter 80mm, inner ring gear teeth module 1.5, length 60mm, with screw mounting flanges on both ends.
Parameters
| Name | Value | Range |
|---|---|---|
| Casing Outer Diameter | 80 mm | 50 – 150 |
| Overall Length | 60 mm | 30 – 150 |
| Ring Gear Module | 1.5 mm | 0.5 – 2 |
| Ring Gear Teeth | 44 teeth | 20 – 48 |
| Flange Outer Diameter | 100 mm | 60 – 200 |
| Flange Thickness | 6 mm | 2 – 15 |
| Bolt Hole Count (per flange) | 6 count | 3 – 12 |
| Bolt Hole Diameter | 4.5 mm | 2 – 10 |
| Bolt Circle Diameter | 88 mm | 40 – 180 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Spur Gearbox
design gearbox
Involute Spur Gear with Keyway
Precision Involute Spur Gear with Hub and Keyway: Module (m) of 2.0 mm, 40 teeth (z), Pitch Circle Diameter (d) of 80.00 mm, 20° pressure angle (\alpha), 15.00 mm face width (b), a
Parametric Helical Gear
Create a parametric helical gear with the following specifications: 32 teeth, normal module of 3 mm, right-hand helix, total face width of 80 mm, and a central bore hole with a dia
Rod with Spur Gear
Metal rod diameter is 20 mm and length is 100 mm and right side attach a gear and their OD is 50 mm
Spur Gear (12 Teeth)
Built a gear with 12 teeth
Two-Stage Spur Gear Reduction Assembly
Design a 2-stage spur gear reduction set for 3D printing with an overall 10:1 ratio. Stage 1: A 12-tooth pinion driving a 36-tooth gear (3:1). Stage 2: A 12-tooth pinion coupled