Gears and transmission
Planetary Gear Set (Sun + 2 Planets)
- Bounding box
- 100.0 × 100.0 × 18.0 mm
- Engine
- Precision B-rep
- Parameters
- 14
- Published
- September 16, 2026
Download
Free to download and use. See the terms.
The prompt
I would like to get a 2 planetary gear within 3 gear
Parameters
| Name | Value | Range |
|---|---|---|
| Module | 2 mm | 0.5 – 5 |
| Sun Teeth | 20 teeth | 8 – 40 |
| Planet Teeth | 12 teeth | 6 – 30 |
| Gear Face Width | 10 mm | 4 – 30 |
| Sun Bore | 8 mm | 2 – 20 |
| Planet Bore | 6 mm | 2 – 16 |
| Planet Count | 2 ea | 1 – 4 |
| Center Dist. Backlash | 0.1 mm | 0.05 – 0.5 |
| Carrier Plate Dia | 100 mm | 60 – 160 |
| Carrier Thickness | 6 mm | 3 – 20 |
| Plate Edge Fillet | 2 mm | 0 – 5 |
| Sun Shaft Dia | 8 mm | 4 – 20 |
| Planet Pin Dia | 6 mm | 3 – 16 |
| Pin Height Above Plate | 12 mm | 8 – 40 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Spur Gearbox
design gearbox
Involute Spur Gear with Keyway
Precision Involute Spur Gear with Hub and Keyway: Module (m) of 2.0 mm, 40 teeth (z), Pitch Circle Diameter (d) of 80.00 mm, 20° pressure angle (\alpha), 15.00 mm face width (b), a
Parametric Helical Gear
Create a parametric helical gear with the following specifications: 32 teeth, normal module of 3 mm, right-hand helix, total face width of 80 mm, and a central bore hole with a dia
Rod with Spur Gear
Metal rod diameter is 20 mm and length is 100 mm and right side attach a gear and their OD is 50 mm
Spur Gear (12 Teeth)
Built a gear with 12 teeth
Two-Stage Spur Gear Reduction Assembly
Design a 2-stage spur gear reduction set for 3D printing with an overall 10:1 ratio. Stage 1: A 12-tooth pinion driving a 36-tooth gear (3:1). Stage 2: A 12-tooth pinion coupled