Brackets and mounts
Pip-Boy 3000 Outer Shell
- Bounding box
- 92 × 132 × 30 mm
- Engine
- 3D Printing B-rep
- Parameters
- 22
- Published
- November 1, 2026
Download
Free to download and use. See the terms.
The prompt
The previous response could not be converted into a valid 3D printing model. Please generate the complete Pip-Boy 3000 outer shell as valid OpenSCAD code. IMPORTANT REQUIREMENTS: - Reply with ONE fenced code block using the openscad language identifier. - Put the entire OpenSCAD script inside that single code block. - Do not include explanations, comments outside the code block, or any additional text. - The script must be syntactically valid and renderable in OpenSCAD. - Use parametric variables for all major dimensions. - Create a hollow, rounded rectangular wrist-mounted enclosure. - Include a front opening reserved for the display. - Include internal mounting points for electronics. - Include a removable rear cover. - Include a side opening reserved for a USB-C charging port. - Include a removable battery compartment provision. - Keep the Fallout Pip-Boy 3000 retro-industrial aesthetic. All dimensions are provisional and should be easy to modify later. Do not assume that the display, battery, or electronics have been finalized.
Parameters
| Name | Value | Range |
|---|---|---|
| Enclosure width, X | 92 mm | 60 – 160 |
| Enclosure length, Y | 132 mm | 80 – 220 |
| Enclosure height, Z | 30 mm | 15 – 60 |
| Plan corner radius | 10 mm | 3 – 20 |
| Side wall thickness | 5 mm | 2 – 8 |
| Display face thickness | 3 mm | 1.5 – 5 |
| Display opening width | 66 mm | 20 – 110 |
| Display opening length | 48 mm | 20 – 100 |
| Display centre along Y | -20 mm | -60 – 60 |
| Bezel border width | 4 mm | 1 – 10 |
| Bezel recess depth | 1.5 mm | 0.5 – 4 |
| Cover plate thickness | 2.5 mm | 1.2 – 5 |
| Cover press-fit overlap per side | 0.3 mm | 0.1 – 1 |
| Cover ledge width | 3 mm | 1.5 – 5 |
| Battery bay width | 60 mm | 30 – 80 |
| Battery bay length | 28 mm | 15 – 70 |
| Battery bay start along Y | 30 mm | -40 – 70 |
| Battery bay height | 22 mm | 10 – 45 |
| Port opening width | 9 mm | 5 – 16 |
| Port opening height | 3.5 mm | 2 – 8 |
| Port opening centre Y | -50 mm | -70 – 40 |
| Port opening bottom Z | 6 mm | 3 – 20 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Trumpet Lyre Mount Main Body
A single 3D mechanical CAD part for a trumpet music lyre mount (Main Body with Paddle). Geometry details: 1. A 18mm-wide semi-cylindrical clamp arc for a 28mm diameter cylinder, w
UAV Ogive Nose Cone
Design a watertight, 3D-printable aerodynamic nose cone module for a fixed-wing tactical UAV, optimized for printing in Carbon Fiber Filled PETG (PETG-CF). The base of the nose con
Flat-Strap Reel Spool
Create a 3D model of a custom flat-strap reel spool for a home plate housing cavity. Geometry: - A reel spool consisting of two parallel circular outer flanges connected by a cent
PET Recycling Kiosk Frame
Design a production-ready welded steel frame for an outdoor PET bottle recycling and animal feeding kiosk. Create ONLY the steel frame. Do not create covers, motors, tanks, electr
Kugoo G2 Pro Rear Swingarm for KuKirin G4
Create a detailed 1:1 CAD drawing of custom rear swingarms for the Kugoo G2 Pro 2020 electric scooter. The swingarms must be designed to fit a KuKirin G4 hub motor instead of the o
Humanoid Robot Exploded Assembly
Design a 3D CAD model of a fully autonomous humanoid biped robot for the Robofest AI HOMO BOT competition. Dimensions Height: 800 mm (80 cm) Maximum weight: 20 kg Lightweight modu