Brackets and mounts
Pikachu Cable Organizer
- Bounding box
- 90.0 × 70.0 × 85.0 mm
- Engine
- Precision B-rep
- Parameters
- 27
- Published
- August 16, 2026
Download
Free to download and use. See the terms.
The prompt
Create a parametric 3D solid model of a geometric, low-poly Pikachu-themed cable organizer in STEP format. 1. Base Geometry: - Solid rectangular base: 90mm width, 70mm depth, 20mm height. - Chamfer all outer top edges of the base by 3mm for a low-poly aesthetic. 2. Iconic Tail Feature (Cable Clip): - Extrude a stylized, 8mm thick zig-zag Pikachu tail vertically from the rear of the base to a height of 85mm. - Integrate three 4mm U-shaped friction-fit cable slots along the top zig-zag edges of the tail to route standard USB cables. 3. Storage Pockets: - Cut two top-down rectangular recessed pockets into the base: - Phone Docking Slot: 85mm width, 14mm depth, tilted back at 12 degrees. - SD Card / Flash Drive Slot: 40mm width, 5mm depth, 10mm height. 4. Manufacturing Specs: - Flat bottom surface optimized for zero-support FDM 3D printing. - Minimum wall clearance between internal pockets: 3.2mm. - Output as a manifold single solid B-Rep body.
Parameters
| Name | Value | Range |
|---|---|---|
| Base Width | 90 mm | 60 – 120 |
| Base Depth | 70 mm | 40 – 100 |
| Base Height | 20 mm | 10 – 40 |
| Top Chamfer | 3 mm | 0 – 8 |
| Tail Thickness | 8 mm | 4 – 15 |
| Tail Top Height | 85 mm | 50 – 120 |
| Tail Bottom Left X | 20 mm | 5 – 40 |
| Tail Bottom Right X | 60 mm | 30 – 85 |
| Tail Top Left X | 20 mm | 5 – 40 |
| Tail Top Right X | 50 mm | 20 – 80 |
| Tail Middle Zig-Zag Z | 40 mm | 25 – 70 |
| Tail Middle Left X | 35 mm | 15 – 50 |
| Tail Middle Right X | 50 mm | 25 – 70 |
| Cable Slot Width | 4 mm | 2 – 8 |
| Cable Slot Depth | 8 mm | 3 – 15 |
| Cable Slot Count | 3 mm | 1 – 6 |
| Phone Slot X Start | 2.5 mm | 0 – 10 |
| Phone Slot Width | 85 mm | 50 – 89 |
| Phone Slot Y Start | 18 mm | 5 – 40 |
| Phone Slot Y Width | 12 mm | 6 – 25 |
| Phone Slot Depth | 14 mm | 8 – 18 |
| Phone Slot Tilt Angle | 12 deg | 0 – 30 |
| SD Slot X Start | 25 mm | 5 – 60 |
| SD Slot Width | 40 mm | 20 – 80 |
| SD Slot Y Start | 8 mm | 2 – 40 |
| SD Slot Depth | 5 mm | 2 – 15 |
| SD Slot Height | 10 mm | 4 – 18 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Trumpet Lyre Mount Main Body
A single 3D mechanical CAD part for a trumpet music lyre mount (Main Body with Paddle). Geometry details: 1. A 18mm-wide semi-cylindrical clamp arc for a 28mm diameter cylinder, w
UAV Ogive Nose Cone
Design a watertight, 3D-printable aerodynamic nose cone module for a fixed-wing tactical UAV, optimized for printing in Carbon Fiber Filled PETG (PETG-CF). The base of the nose con
Flat-Strap Reel Spool
Create a 3D model of a custom flat-strap reel spool for a home plate housing cavity. Geometry: - A reel spool consisting of two parallel circular outer flanges connected by a cent