Brackets and mounts
Photogrammetry Turntable Rig
- Bounding box
- 180.1 × 527.5 × 289.5 mm
- Engine
- Precision B-rep
- Parameters
- 28
- Published
- October 24, 2026
Download
Free to download and use. See the terms.
The prompt
A 3D printable mechanical photogrammetry rig with integrated bearing housings. Features a flat circular center platform mounted on a vertical steel shaft that runs through two 22mm outer diameter round bearing pockets (for standard 608 ball bearings) to ensure ultra-smooth rotation. Connected to the heavy base is a semicircular sweeping arm (250mm radius) that also pivots on a bearing-supported axle. The arm features a sliding phone holder mount with a 1/4-inch tripod screw interface, adjustable from 0 to 45 degrees. Optimized with tight-tolerance pockets for press-fitting metal bearings
Parameters
| Name | Value | Range |
|---|---|---|
| Base Diameter | 180 mm | 100 – 300 |
| Base Thickness | 20 mm | 10 – 40 |
| Arm Pivot Offset | 70 mm | 30 – 80 |
| Pivot Boss Diameter | 30 mm | 22 – 50 |
| Pivot Boss Height | 12 mm | 7 – 30 |
| Bearing OD | 22 mm | 15 – 30 |
| Bearing ID | 8 mm | 5 – 12 |
| Bearing Thickness | 7 mm | 4 – 12 |
| Press-Fit Interference | 0.2 mm | 0 – 1 |
| Shaft Diameter | 8 mm | 5 – 12 |
| Shaft Length | 80 mm | 40 – 150 |
| Platform Diameter | 150 mm | 80 – 250 |
| Platform Thickness | 8 mm | 4 – 20 |
| Hub Diameter | 30 mm | 20 – 50 |
| Hub Height | 17 mm | 8 – 30 |
| Base-to-Platform Clearance | 25 mm | 5 – 80 |
| Pivot Axle Diameter | 8 mm | 5 – 12 |
| Pivot Axle Length | 40 mm | 20 – 80 |
| Arm Pivot Height | 32 mm | 10 – 80 |
| Arm Radius | 250 mm | 100 – 400 |
| Arm Width | 20 mm | 10 – 50 |
| Arm Radial Thickness | 15 mm | 8 – 30 |
| Holder Length | 80 mm | 40 – 150 |
| Holder Width | 60 mm | 30 – 120 |
| Holder Height | 25 mm | 10 – 50 |
| Holder Tilt | 0 deg | 0 – 45 |
| Tripod Screw Diameter | 6.35 mm | 4 – 10 |
| Tripod Screw Length | 12 mm | 6 – 30 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Trumpet Lyre Mount Main Body
A single 3D mechanical CAD part for a trumpet music lyre mount (Main Body with Paddle). Geometry details: 1. A 18mm-wide semi-cylindrical clamp arc for a 28mm diameter cylinder, w
UAV Ogive Nose Cone
Design a watertight, 3D-printable aerodynamic nose cone module for a fixed-wing tactical UAV, optimized for printing in Carbon Fiber Filled PETG (PETG-CF). The base of the nose con
Flat-Strap Reel Spool
Create a 3D model of a custom flat-strap reel spool for a home plate housing cavity. Geometry: - A reel spool consisting of two parallel circular outer flanges connected by a cent
PET Recycling Kiosk Frame
Design a production-ready welded steel frame for an outdoor PET bottle recycling and animal feeding kiosk. Create ONLY the steel frame. Do not create covers, motors, tanks, electr
Kugoo G2 Pro Rear Swingarm for KuKirin G4
Create a detailed 1:1 CAD drawing of custom rear swingarms for the Kugoo G2 Pro 2020 electric scooter. The swingarms must be designed to fit a KuKirin G4 hub motor instead of the o
Humanoid Robot Exploded Assembly
Design a 3D CAD model of a fully autonomous humanoid biped robot for the Robofest AI HOMO BOT competition. Dimensions Height: 800 mm (80 cm) Maximum weight: 20 kg Lightweight modu