Everything else
Phone Rocker Button Device
- Bounding box
- 30.0 × 15.0 × 4.5 mm
- Engine
- Precision B-rep
- Parameters
- 9
- Published
- August 29, 2026
Download
Free to download and use. See the terms.
The prompt
Design a 2 button device as pictured that can adhere to the side or back of phone that is small with minimal depth in order to not stick out to far. The device buttons must be able to be pressed down one at a time and release the other side when pressed down
Parameters
| Name | Value | Range |
|---|---|---|
| Overall Length | 30 mm | 20 – 50 |
| Overall Width | 15 mm | 10 – 25 |
| Base Thickness | 1.5 mm | 1 – 3 |
| Button Height Above Base | 3 mm | 2 – 6 |
| Button Pad Length | 10 mm | 6 – 15 |
| Central Gap / Pivot Width | 4 mm | 2 – 8 |
| Pivot Height Above Base | 1.5 mm | 0.5 – 3 |
| Base Corner Radius | 3 mm | 1 – 5 |
| Button Top Fillet Radius | 0.8 mm | 0.1 – 2 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Table
Make a table of height 45 cm
旋转式卷烟陈列架
物件名称： 旋转式卷烟陈列架（带语音播报） 整体形态： 一个圆柱形、可360度旋转的立式展示架。 整体高度为1380mm，直径为600mm。 底部配有4个带刹车的万向轮，方便移动和固定。 结构分层（从下往上）： 底座（0-200mm高度）： 底部为圆柱形底座，高200mm。 外层采用网格状设计（类似金属网孔或菱形网格）。 底座内部中空，用于内置音箱设备。
Haul‑off Reel
Make this haul off reel, the dimensions of it should be a 2 meter diameter circle shaper with 0.7 meter width, i have attached a picture of what it looks like