Petroleum Geological Display Model

1 views

Bounding box: 600 × 400 × 453 mm
Engine: 3D Printing B-rep
Parameters: 60
Published: November 4, 2026

Download

Free to download and use. See the terms.

The prompt

Use the uploaded image as the main visual reference. Recreate this petroleum geological model as one unified 3D CAD design. Overall dimensions: - Length: 600 mm - Width: 400 mm - Height: 400 mm Preserve the main features: 1. Geological rock layers with realistic curved shapes. 2. Anticline and syncline folds. 3. Normal and reverse faults. 4. Rock joints and fractures. 5. Deviated well and horizontal well. 6. Oil, gas and water zones. 7. Drilling rig, storage tanks and surface facilities. 8. Rectangular display base. Important: - Match the uploaded reference image as closely as possible. - Create an editable parametric CAD model, not just a 3D image. - Keep the complete model as one assembled design. - Make it suitable for 3D printing. - Use millimeters. - Allow editing of dimensions and individual features.

Parameters

Name	Value	Range
Base length	600 mm	300 – 800
Base width	400 mm	200 – 600
Base thickness	30 mm	10 – 60
Base corner radius	15 mm	0 – 40
Rock block length	560 mm	200 – 700
Rock block width	360 mm	150 – 500
Rock block height	300 mm	100 – 400
Number of folded strata	8 mm	3 – 20
Fold amplitude	35 mm	0 – 80
Fault cut width	5 mm	1 – 15
Fault cut depth from face	55 mm	10 – 150
Fault dip angle	25 deg	0 – 60
Joint cut width	2.5 mm	1 – 8
Joint cut depth from face	30 mm	5 – 80
Number of joint cuts	4 mm	1 – 10
Zone protrusion past front face	8 mm	0 – 25
Gas zone length	120 mm	40 – 250
Gas zone width	80 mm	30 – 200
Gas zone height	40 mm	15 – 120
Gas zone centre X	0 mm	-250 – 250
Gas zone centre Z	270 mm	50 – 380
Oil zone length	180 mm	40 – 300
Oil zone width	100 mm	30 – 220
Oil zone height	50 mm	15 – 150
Oil zone centre X	-80 mm	-250 – 250
Oil zone centre Z	205 mm	50 – 380
Water zone length	200 mm	40 – 320
Water zone width	120 mm	30 – 240
Water zone height	60 mm	15 – 180
Water zone centre X	120 mm	-250 – 250
Water zone centre Z	110 mm	50 – 380
Deviated well diameter	12 mm	6 – 25
Deviated well top X	-225 mm	-260 – 260
Deviated well top Y	-90 mm	-170 – 170
Deviated well bottom X	-120 mm	-260 – 260
Deviated well bottom Y	-131 mm	-170 – 170
Deviated well bottom Z	200 mm	40 – 380
Horizontal well diameter	10 mm	5 – 25
Horizontal well length	180 mm	50 – 400
Rig centre X	-225 mm	-260 – 260
Rig centre Y	-90 mm	-170 – 170
Rig skid length	90 mm	40 – 180
Rig skid width	70 mm	30 – 150
Rig mast height	120 mm	40 – 250
Mast leg diameter	7 mm	3 – 15
Mast top taper ratio	0.3 mm	0.1 – 0.9
Rig skid height	6 mm	2 – 20
Tank diameter	40 mm	15 – 100
Tank height	50 mm	15 – 150
Tank wall thickness	2.5 mm	1.2 – 8
First tank centre X	160 mm	-260 – 260
Tank centre Y	110 mm	-170 – 170
Tank centre spacing	60 mm	30 – 150
Facility centre X	140 mm	-260 – 260
Facility centre Y	-110 mm	-170 – 170
Facility length	100 mm	40 – 200
Facility width	60 mm	30 – 150
Facility height	40 mm	15 – 120
Pipe diameter	8 mm	3 – 20
Separator vessel diameter	24 mm	10 – 60

Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.

More models

Browse the full gallery →

600.0 × 400.0 × 450.0 mmPrecision

Table

Make a table of height 45 cm

STEPSTLGLB5 PARAMS

700.6 × 2000.6 × 2000.0 mmPrecision

Haul‑off Reel

Make this haul off reel, the dimensions of it should be a 2 meter diameter circle shaper with 0.7 meter width, i have attached a picture of what it looks like

STEPSTLGLB6 PARAMS

664.7 × 664.7 × 1380.1 mmPrecision

旋转式卷烟陈列架

物件名称：旋转式卷烟陈列架（带语音播报）整体形态：一个圆柱形、可360度旋转的立式展示架。整体高度为1380mm，直径为600mm。底部配有4个带刹车的万向轮，方便移动和固定。结构分层（从下往上）：底座（0-200mm高度）：底部为圆柱形底座，高200mm。外层采用网格状设计（类似金属网孔或菱形网格）。底座内部中空，用于内置音箱设备。

STEPSTLGLB24 PARAMS