Everything else
PETG Sliding Gate (No Tether)
- Bounding box
- 132.8 × 74.0 × 33.6 mm
- Engine
- Precision B-rep
- Parameters
- 22
- Published
- September 23, 2026
Download
Free to download and use. See the terms.
The prompt
remove the piece connecting the two parts
Parameters
| Name | Value | Range |
|---|---|---|
| Nozzle Diameter | 0.6 mm | 0.2 – 1.2 |
| Layer Height | 0.3 mm | 0.1 – 0.6 |
| Min Wall Lines | 2 lines | 1 – 5 |
| Duct / Hose Bore | 32 mm | 8 – 120 |
| Collar Length | 12 mm | 3 – 60 |
| Collar Wall | 2.4 mm | 1.2 – 8 |
| Duct Center Height | 30 mm | 5 – 120 |
| Body Width | 70 mm | 20 – 200 |
| Body Height | 60 mm | 20 – 200 |
| Plate Thickness | 3 mm | 1.2 – 10 |
| Blade Slot Gap | 3.6 mm | 1.2 – 12 |
| Side Rail Width | 6 mm | 1.2 – 30 |
| Bottom Rail Height | 6 mm | 0 – 60 |
| Blade Thickness | 2.4 mm | 0.9 – 8 |
| Blade Bottom Y | 4 mm | -20 – 60 |
| Blade Length | 70 mm | 10 – 200 |
| Handle Hole Diameter | 8 mm | 2 – 30 |
| Handle Hole Offset | 10 mm | 2 – 60 |
| Blade Separation Gap | 6 mm | 1 – 40 |
| Blade Side Clearance | 0.6 mm | 0.1 – 3 |
| Corner Radius | 2 mm | 0 – 8 |
| Collar Root Fillet | 1 mm | 0 – 4 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Table
Make a table of height 45 cm
Haul‑off Reel
Make this haul off reel, the dimensions of it should be a 2 meter diameter circle shaper with 0.7 meter width, i have attached a picture of what it looks like
旋转式卷烟陈列架
物件名称： 旋转式卷烟陈列架（带语音播报） 整体形态： 一个圆柱形、可360度旋转的立式展示架。 整体高度为1380mm，直径为600mm。 底部配有4个带刹车的万向轮，方便移动和固定。 结构分层（从下往上）： 底座（0-200mm高度）： 底部为圆柱形底座，高200mm。 外层采用网格状设计（类似金属网孔或菱形网格）。 底座内部中空，用于内置音箱设备。
Deck with U-Shape and Stairs
ARE THOSE ALL THE SAME DEMETNIONS THT I GAVE YOU IN THE FIRST MESSAGE
Three-Phase Asynchronous Motor 7.5 kW
moteur asynchome triphasé 7.5kw 1500tr/mn
Bánh răng trụ thẳng Ø14 – lỗ Ø6.5
Tạo cho tôi 1 bánh răng đường kính 14 lỗ 6.5mm